The factory- set airflow of the wide LCT may not be strong enough to separate the sheets.
Increase the airflow.
Set 111: [Paper Feed Mode (Adjust Fan Level)] to [Moderate Nonfdg Red. (Higher)] in [Advanced Settings] for the custom paper.
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Repeat Step 2. If the jam code appears more than 3 times, set 111: [Paper Feed Mode (Adjust Fan Level)] to [Max Nonfdng Reduc. (Highest)]. |
Set 110: [Switch Paper Load Upper Limit] to [High].
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
If the problem persists, contact your service representative. |