In the 02: [Machine: Image Quality] group on the [Adjustment Settings for Skilled Operators] menu, select 0201: [Adjust Image Density/ DEMS] and execute [Image Density Adjustment: Manual Execute].
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Check the present value in 0204: [Adjust Line Width]. Is the setting set to "+5"?
Yes |
Contact your service representative. |
No |
In 0204: [Adjust Line Width], increase the all colors' value by 1 step. If the problem persists even though you have increased the value to "+5", contact your service representative. |