Previous
Adjust the fold width of the bottom segment 2 (S2) of gate folded sheets when using the multi-folding unit.
Press [+] to increase (S2) and [－] to reduce it.
The upper right illustration shows a partly opened, gate folded sheet, and the lower right illustration shows a fully folded sheet.
The 
mark indicates the leading edge (relative to the paper feed direction), and the 
mark indicates the trailing edge.
You cannot specify this setting when using 12" × 18"
paper.
Setting Item |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|
[Adjust Gate Fold Position 2] |
4.0 |
-4.0 |
0.2 |
mm |
