Adjust the fold position of the bottom segment (S) of letter fold-in sheets when using the multi-folding unit.
This setting will not be applied when the multi-sheet fold function is enabled.
Press [+] to increase (S) and [-] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates the trailing edge.
Setting Item |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|
[Adjust Letter Fold-in Position 1: Single-sheet Fold] |
4.0 |
-4.0 |
0.2 |
mm |