Adjust the fold position for the bottom segment (S2) of letter fold-out sheets when using the multi-folding unit.
This setting will not be applied when the multi-sheet fold function is enabled.
Press [+] to increase (S2) and [-] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates the trailing edge.
Setting Item |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|
[Adjust Letter Fold-out Position 1: Single-sheet Fold] |
3.0*1 |
-3.0*1 |
0.2 |
mm |
*1 Although you can enter up to ± 4 mm, the adjustment value is effective only within the range of ± 3 mm.