Specify how to correct skew (occurring during paper transport) when Z-folding with the folding unit.
If [Off] is selected, skew is not corrected.
If [On] is selected, skew is corrected by bringing the sheets flush against a guide.
If [On (Reverse)] is selected, skew is corrected by bringing the sheets flush against a guide while the registration roller rotates in reverse to prevent the Z-folded sheets from passing through the registration roller.
Setting Item |
Values |
Default Value |
---|---|---|
[Z-fold Skew Correction] |
[On] [On (Reverse)] [Off] |
[On (Reverse)] |