Previous
Adjust the permissible range of skew.
By increasing the permissible range of skew, you can make the machine print without stopping for skews within the permissible range.
This is enabled only if 0104: [Skew Detection] is set to [On].
Press [+] to increase the permissible range or [－] to decrease it.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|---|
[Tray 1] |
3.0 |
7.5 |
1.6 |
0.1 |
mm |
[Tray 2] |
|||||
[2-Tray LCT: Tray 3] |
|||||
[2-Tray LCT: Tray 4] |
|||||
[2-Tray LCT: Tray 5] |
|||||
[2-Tray LCT: Tray 6] |
|||||
[2-Tray LCT: Tray 7] |
|||||
[2-Tray LCT: Tray 8] |
|||||
[Bypass Tray] |
