Menu Items and Functions: Adjustment Settings for Skilled Operators

0101

[Adjust Image Position Across Feed Direction]

Adjust the vertical position of the print image.

0102

[Adjust Image Position With Feed Direction]

Adjust the horizontal position of the print image.

0103

[Deactivate Image Position Adjustment Across Feed Dir]

Specify whether or not to disable the machine's function to automatically detect paper pathway deviations during paper feeding and adjust the vertical position of the print image accordingly.

0104

[Skew Detection]

Specify whether or not to detect paper skew. This setting is not effective for paper fed from paper trays with custom paper presets.

0105

[Skew Detection Level]

Adjust the permissible range of skew.

0106

[Adjust Erase Margin With Feed Direction]

Adjust the mask width at the leading edge or trailing edge of the image.

0107

[Perpendicularity Adjustment]

Adjust the vertical skew of the image.

0201

[Adjust Image Density/ DEMS]

Execute image density control manually.

0202

[Image Density Adjustment Execute Interval]

Specify the intervals for performing image density adjustment (process control) while printing is performed.

0203

[Adjust Maximum Image Density]

Specify the adhesion of toner to the intermediate transfer belt when image density adjustment is executed.

0204

[Adjust Line Width]

Adjust the intensity of the laser for transferring image data to the drum.

0205

[Adjust Density Difference Across Feed Direction]

Adjust the image density difference between the top and bottom of the image.

0206

[Adjust Fusing Temperature on Standby]

Adjust the set fusing temperature according to the machine status.

0207

[Adjust Image Density Before Auto Color Calibration]

Adjust this setting so as to set the density of the solid-filled area to the specified value.

0208

[Feedback Rate of Auto Img Dens Adj & Color Calib]

Specify the feedback rate of auto image density adjustment and color calibration.

0301

[Adjust Paper Curl]

Specify the method for straightening curled sheets.

0302

[Illumination Mode for Color Paper Detection]

Specify the detection method of the paper edge detection sensor.

0303

[Adjust Registration Paper Buckle]

Adjust the degree of paper arching at the registration gate.

0304

[Double Feed Detection]

Specify whether or not to detect double feeding of paper. This setting is not effective for paper fed from paper trays with custom paper presets.

0305

[When Double Feed is Detected]

Specify how the machine responds when it detects a double feed.

0306

[Activate Auto Corrctn. Snsr. for 2 Sided Magnif. Adjust.]

The machine measures the length and width of both sides of the paper and specifies the magnification ratio of the image on the back side according to the shrinking or transfiguration of the image.

0401

[Auto Color Selection Setting]

Specify the number of sheets the machine prints in full color mode before switching to black-and-white mode when printing a job which involves full color printing followed by black-and-white printing.

0501

[Execute Cleaning Initial Setting for PCU]

Perform this after replacing the cleaning unit for the photoconductor unit or the photoconductor unit (drum).

0502

[Execute Photoconductor Refreshing]

Remove dust on the drum surface.

0503

[Tighten Fuser Cleaning Unit at Replacement]

Tighten the cleaning web after replacing it.

0504

[Execute Cleaning Initial Setting for Paper Transfer Unit]

Initialize the paper transfer unit.

0505

[Fusing Belt Smoothing Setting]

Specify whether or not to automatically use the fusing belt smoothing roller to remove toner wax on the fusing belt.

0506

[Smooth Fusing Belt]

Polish the fusing belt manually to remove paper edge traces and remaining wax on the fusing belt.

0507

[Reset Replaceable Parts Counter]

Reset the counter for replaceable parts.

0508

[Estimated Life Already Used]

Display the duty cycle counters of replaceable parts.

0509

[Temperature / Humidity inside the Machine]

Display the internal temperature and humidity.

0510

[Temperature / Humidity outside the Machine]

Display the external temperature and humidity.

0511

[Back Up / Restore Custom Paper Data]

Back up and restore custom paper profiles.

0512

[Screw-on Cap to Replace Toner Bottle]

Screw on the toner bottle cap.

Be sure to open the toner cartridge cover (the cover of the toner cartridge compartment) in advance. After executing this function, be sure to press the button under the toner cartridge and remove the toner cartridge.

0513

[Execute Developer Refreshing]

Replenish the developer manually.

Replace part of the developer in the development unit.

0514

[Developer Fill]

Fill the developer unit with fresh developer.

0515

[Developer Fill: Result]

Display the result of filling developer.

0516

[Developer Exhaust]

Discharge used developer into the developer bottle.

0517

[Developer Exhaust: Result]

Display the result of discharging developer.

0518

[Developer Setup: Execute]

Perform this after replacing the developer.

0519

[Developer Setup: Result]

Display the result of setting up the developer.

0520

[Execute Charger Cleaning]

Clean the charge roller unit.

0521

[Counter Settings for Fuser Unit Replacement]

Display the counter for the fuser unit replacement.

0522

[Imaging Unit Initial Settings on Replacement]

Perform this after replacing the imaging unit.

0523

[Reset Imaging Unit Initial Settings on Replacement]

Manually stop the machine from performing initial adjustment after replacing the imaging unit.

0601

[Adjust Staple Position Across Feed Direction 1]

Adjust the vertical position of the staple (applied at an edge) when using the Finisher SR5050 or Booklet Finisher SR5060.

0602

[Adjust Staple Position Across Feed Direction 2]

Adjust the vertical gap between staples when stapling on two parts using the Finisher SR5050 or Booklet Finisher SR5060.

0603

[Adjust Staple Position With Feed Direction]

Adjust the horizontal position of the staples when using Finisher SR5050 or Booklet Finisher SR5060.

0604

[Paper Alignment for Stapling Across Feed Direction]

Adjust the width of the staple jogger for edge stapling when using Finisher SR5050 or Booklet Finisher SR5060.

0605

[Paper Alignment for Stapling With Feed Direction]

Adjust the travel distance of the paper edge stopper for edge stapling when using Finisher SR5050 or Booklet Finisher SR5060.

0606

[Number of Sheet Align for Stapling]

Specify the number of sheets the staple unit aligns at a time for stapling.

0607

[Adjust Punch Position Across Feed Direction]

Adjust the vertical position of the punch holes when using Finisher SR5050 or Booklet Finisher SR5060.

0608

[Adjust Punch Position With Feed Direction]

Adjust the horizontal position of the punch holes when using Finisher SR5050 or Booklet Finisher SR5060.

0609

[Punch Skew Correction]

Specify whether or not to enable punch skew correction when using Finisher SR5050 or Booklet Finisher SR5060.

0610

[Correct Punch Skew]

Adjust the amount of skew correction for punching when using Finisher SR5050 or Booklet Finisher SR5060.

0611

[Paper Alignment in Shift Tray Setting]

Specify the accuracy of printed paper alignment when applying shift-sorting with the Finisher SR5050 or Booklet Finisher SR5060.

0612

[Paper Alignment in Shift Tray Across Feed Direction]

Adjust the width of the paper alignment jogger in the shift tray when using Finisher SR5050 or Booklet Finisher SR5060.

0613

[Adjust Output Tray Descending Position]

Specify the descending position for the finisher shift tray when paper is delivered to it using Finisher SR5050 or Booklet Finisher SR5060.

0614

[Adjust Exit Guide Close Timing (Booklet Fin)]

Specify when to close the exit guide after paper is delivered to the finisher shift tray of Finisher SR5050 or Booklet Finisher SR5060.

0615

[Output Trail Edge Press Setting]

Specify whether or not to press down the trailing edge of the paper when it is delivered to the finisher shift tray of Finisher SR5050 or Booklet Finisher SR5060.

0616

[Output Fan Setting]

Specify how the shift tray fan moves when using Finisher SR5050 or Booklet Finisher SR5060.

0617

[Adjust Output Fan Level]

Adjust the airflow of the shift tray for fanning the sheets when using Finisher SR5050 or Booklet Finisher SR5060.

0618

[Adjust Staple Position for Booklet]

Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5060.

0619

[Adjust Folding Position for Booklet]

Adjust the horizontal position of the folding when using Booklet Finisher SR5060.

0620

[Paper Alignment for Booklet Across Feed Dir.]

Adjust the width of the staple jogger for booklets when using Booklet Finisher SR5060.

0621

[Paper Alignment for Booklet With Feed Dir.]

Adjust the travel distance of the paper edge stopper for booklets when using Booklet Finisher SR5060.

0622

[Set Number of Folds for Booklet]

Specify the number of additional booklet folds when using the Booklet Finisher SR5060.

0623

[Z-fold Skew Correction]

Specify how to correct skew (occurring during paper transport) when Z-folding with the folding unit.

0624

[Correct Z-fold Skew]

Adjust the length of sheets moved for Z-fold skew correction.

0625

[Correct Z-fold Skew (Reverse)]

Adjust how much the registration roller rotates in reverse for Z-fold skew correction.

0701

[Half Fold Position (Multi-sheet Fold)]

Adjust the fold position of half folded sheets when using the multi-folding unit.

0702

[Letter Fold-out Position 1 (Multi-sheet Fold)]

Adjust the fold position for the bottom segment of letter fold-out sheets when using the multi-folding unit.

0703

[Letter Fold-out Position 2 (Multi-sheet Fold)]

Adjust the overall fold size of letters fold-out sheets when using the multi-folding unit.

0704

[Letter Fold-in Position 1 (Multi-sheet Fold)]

Adjust the fold position of the bottom segment of letter fold-in sheets when using the multi-folding unit.

0705

[Letter Fold-in Position 2 (Multi-sheet Fold)]

Adjust the fold position of letters fold-in sheets when using the multi-folding unit.

0706

[Folding Unit Tray Full Detection]

Specify whether or not to automatically detect when the folding unit tray becomes full.

0707

[Number of Sheets Folded after Full Detection]

Specify the number of sheets the machine prints when it detects that the folding unit tray is full before displaying a warning message.

0801

[Cover Sheet Position for Perfect Binding Across Feed Dir]

Adjust the vertical alignment of the cover sheet position when performing perfect binding.

0802

[Cover Sheet Position for Perfect Binding With Feed Dir]

Adjust the horizontal alignment of the cover sheet position when performing perfect binding.

0803

[Adjust Perfect Binding Finishing Angle]

Square the top, bottom, and outside edges when trimming a deck of paper.

0804

[Adjust Applying Binding Glue]

Adjust the amount of binding glue for perfect binding.

0901

[Paper Alignment in Stacker Tray Across Feed Direction 1]

Adjust the width of the main jogger when the high capacity stacker is installed.

0902

[Paper Alignment in Stacker Tray Across Feed Direction 2]

Adjust the width of the sub jogger when the high capacity stacker is installed.

0903

[Paper Alignment in Stacker Tray With Feed Direction]

Adjust the travel distance of the paper edge stopper when the high capacity stacker is installed.

0904

[Paper Alignment in 2nd Stacker Tray Across Feed Dir. 1]

Adjust the width of the main jogger when the second high capacity stacker is installed.

0905

[Paper Alignment in 2nd Stacker Tray Across Feed Dir. 2]

Adjust the width of the sub jogger when the second high capacity stacker is installed.

0906

[Paper Alignment in 2nd Stacker Tray With Feed Direction]

Adjust the travel distance of the paper edge stopper when the second high capacity stacker is installed.

0907

[Maximum Stack Quantity in Stacker Tray]

Set the maximum number of sheets for the stacker tray.