Previous
The following procedure describes adjusting the gradation correction value.
During printing, you can correct the gradation in two areas: bright part (highlight) and the medium (middle). The correction values for the highlight and the medium parts are set using [Print Test Pattern 1] and [Print Test Pattern 2] respectively.
Press the [Menu] key, and then select the setting items using the [
] or [
] key.
Select [Maintenance] 
Press [OK]
Select [Quality Maintenance] Press [OK]
Select [Color Calibration] Press [OK]
Select [Adjust Auto Density] Press [OK]
A confirmation message appears. Press [OK] to adjust Auto Density.
A confirmation message appears when the adjustment is complete. Press [Exit].
The display returns to the [Color Calibration] screen.
Select [Print Test Pattern 1] Press [OK]
Press [Print].
Compare the colors printed on gradation correction sheet 1 with the colors you want to reproduce.
When the selected sheet is printed, a confirmation message will appear.
Press [Continue].
Select the color you want to adjust Press [OK]
Adjust the correction value Press [OK]
Press [Result].
Press [Print].
Check the result by printing the calibration sheet.
Press [Yes].
Select [Print Test Pattern 2] Press [OK]
Adjust the midtones on gradation correction sheet 2 by repeating the procedure you used to adjust the color values on gradation correction sheet 1.
