Previous
This section describes the configuration page.
System Reference
Machine ID
Displays the serial number assigned to the board by its manufacturer.
Total Memory
Displays the total amount of memory (SDRAM) installed on the printer.
Total Counter
Displays the total number of pages printed by the printer to date.
Firmware Version
Printer
Displays the version number of the printer firmware.
System
Displays the version number of the system firmware.
Engine
Displays the version number of the printer engine.
NIB
Displays the version number of the network interface.
Device Connection
This item(s) appears when the device option(s) is installed.
HDD: Font/Macro Download
Displays the capacity of the hard disk drive.
Printer Language
Displays the version number of the printer language.
Attached Equipment
Displays the installed optional equipment.
Paper Input
Displays the settings made under the Paper Input menu.
Maintenance
Displays the settings made under the Maintenance menu.
System
Displays the settings made under the System menu.
Machine Modes
Displays the settings made under the Machine Modes menu.
PCL Menu
Displays the settings made under the PCL Menu.
PS Menu
Displays the settings made under the PS Menu.
PDF Menu
Displays the settings made under the PDF Menu.
XPS Menu
Displays the settings made under the XPS Menu.
Host Interface
Displays the settings made under the Host Interface menu.
When the network uses DHCP, the actual IPv4 address, subnet mask, and gateway address appear in parentheses on the configuration page.
Interface Information
Displays the interface information.
The printed items vary depending on the installed options and printer settings.
