Skip header
 

Connecting to the USB (Type B) Interface

This section explains how to connect a USB 2.0 (Type B) interface cable to the USB 2.0 port.

Important

  • If the main power switch is on, turn it off.

1Make sure the power is switched off.

2Connect a USB 2.0 (Type B) interface cable to the USB port B.

Rear side of the printer illustration

3Connect the other end to the USB 2.0 port on the host computer.

Note

  • This printer does not come with a USB interface cable. Make sure you purchase the appropriate cable for the printer (connector shape) and your computer.

  • Use a five meter (16.4 foot) or shorter cable that supports USB 2.0 (Type B) interface.

  • Check the type of the plug before connecting.

  • Do not pull the connected cable forcefully. Make sure the cable is properly connected. Otherwise, it might become disconnected or somebody might trip on it.

  • Using a cable with some connectors or converters may result in an improper connection.

PreviousNext