Top Page > Operating Instructions > Remarks > Where to Put Your Machine > Machine Environment > Optimum environmental conditions
This section describes precautions when installing the machine.
|
Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water or any other liquids, on or close to this machine. Fire or electric shock could result from spillage or if such objects or substances fall inside this machine.
|
|
Keep the machine away from salt-bearing air and corrosive gases. Also, do not install the machine in places where chemical reactions are likely (laboratories, etc.), as doing so will cause the machine to malfunction.
|
Temperature: 10–30 °C, 50–86 °F
Humidity: 20–90 % RH
A strong and level base.
The machine must be level within 5 mm (0.2 inches) from both front to rear and left to right.