[System]

1

[Auto Reset Timer]

The machine's settings will be reset to their default values if it is left idle for a set period of time.

Default: [Off]

2

[Disp. Resettable Counter]

Shows the total number of masters and prints.

The trial print is not counted as part of the total.

3

[Reset Resettable Counter]

You can specify whether to reset this counter.

Default: [Do not reset]

4

[mm/Inch]

You can select the units of measurement used on the panel display.

(mainly Europe and Asia):

Default: [mm]

(mainly North America):

Default: [inch]

5

[Language on LCD]

You can select the language for the panel display.

Default: [English]

6

[Date/Time]

You can use the number keys to set the date and time for the machine's internal clock.

7

[Energy Saver Option]

You can select Energy Saver mode. The two modes available: Energy Saving and Auto Off.

Default: [Energy Saving]

8

[Energy Saver Timer]

You can specify the time the machine waits to enter Energy Saver mode.

Default: [1 min.] (minutes)

9

[Auto Off Timer]

You can specify whether to use the Auto Off Timer.

(mainly Europe and Asia):

Default: [On], [0 hr.: 0 min.]

(mainly North America):

Default: [Off]

10

[Data Print]

You can print log data and counter lists.

11

[Backlight Timer]

You can specify the amount of time the display panel backlight remains lit.

Default: [1 min.] (minutes)