Skip header
 

Machine Interior

Machine illustration numbered callout illustration

  1. Exposure glass

    Place originals face down on the exposure glass.

  2. Master eject unit

    Open to remove the misfed master.

  3. Master eject box

    Used masters are stored here.

  4. Paper delivery side plates

    Use these to align prints on the paper delivery tray.

  5. Paper delivery end plate

    Use this plate to align the prints' leading edges.

  6. Paper delivery tray

    Prints are delivered here.

  7. Main switch

    Use this switch to turn the power on or off. See Turning On/Off the Power.

  8. Drum unit

    The master is wrapped around this unit.

  9. Drum unit lock lever

    Lift this lever to unlock and pull out the drum unit.

  10. Ink holder

    Place the ink cartridge in this holder.

PreviousNext