Previous
This section describes how to change the port settings of SmartDeviceMonitor under Windows 7 when a printer driver has been installed.
For details about SmartDeviceMonitor for Client, see SmartDeviceMonitor for Client.
Right-click the icon of the printer you want to use in the [Devices and Printers] window, and then click [Printer properties].
Under Windows Vista and Windows Server 2008, click the icon of the printer you want to use in the [Printer] window.
Under Windows 8/8.1 and Windows Server 2012/2012 R2, click [Settings] on the Charm Bar, click [Control Panel], then click [View devices and printers] on the [Control Panel] window, right-click the icon of the printer you want to use, and click [Printer Properties].
Click the [Ports] tab, and then click [Add Port].
Click [SmartDeviceMonitor], and then click [New Port].
This will be followed by selection of the printer to be used. The following is the procedure for selecting the printer using TCP/IP.
Click [TCP/IP], and then click [Search].
Available printers are listed.
Click the printer you want to use, and then click [OK].
Printers that respond to a broadcast from the computer will be displayed. To print to a printer not listed here, click [Specify Address], and then enter the printer's IP address or host name.
Close the printer port dialog box.
Check the location for the selected printer, and click [Close].
