Settings You Can Change with User Tools

You can make settings under a DHCP environment. If you have set [DHCP (Auto-Obtain)] to [On], you cannot specify [IP Address], [Subnet Mask], or [Gateway Address].

• On

• Off

Default: On

You can specify [IP Address]. If you specify [IP Address], set [DHCP (Auto-Obtain)] to [Off].

Default: 011.022.033.044

Specify a unique IP address - not the same as any other on the network.

Be sure to specify [Subnet Mask] before using the printer. If you specify [Subnet Mask], set [DHCP (Auto-Obtain)] to [Off].

Default: 000.000.000.000

A gateway is a connection or interchange point between two networks. Configure the gateway address for the router or host computer used as a gateway.

When you configure [Gateway Address], set [DHCP (Auto-Obtain)] to [Off].

Default: 000.000.000.000

Set the access speed for networks.

Select a speed that matches your network environment. [Auto Select] should usually be selected.

• Auto Select

• 10Mbps Fixed

• 100Mbps Fixed

Default: Auto Select