Skip header
 

Printing the Format

Using the computer and the machine, print the format matching the size of the paper requiring image position adjustment.

1Continuously print the format on both sides of 10 sheets.

The format has arrows on 4 corners.

2Measure the length of specified parts on the 6th sheet among the printed copies of the format.

Using the ruler and magnifier, measure the length between each corner of the paper and the top of its adjoining arrow, and the length between the top of arrows with the scale in 0.1 mm.

Illustration of format

  1. Length between the top of each arrow

  2. Length between each corner and the top of its adjoining arrow

  3. Length between the top of each arrow

  4. Length between each corner and the top of its adjoining arrow

  5. Length between each corner and the top of its adjoining arrow

  6. Length between the top of each arrow

  7. Length between each corner and the top of its adjoining arrow

  8. Length between the top of each arrow

3Write the measured value within the framework of the format.

In total (including both sides of the sheet), measure the position of 16 parts.

Note

  • Depending on the paper size, when you print continuously, the feeding interval differs for each sheet of the first and last 3 to 4 sheets and the sheets in the middle (in the case of printing 10 sheets, the 5th and 6th sheets). Therefore, it is recommended to use the 6th sheet for measurement.