Previous
In [Advanced Settings] for the custom paper you are using, check the present value in 016: [Paper Transfer Feed Speed Adjustment].
Is it lower than -0.5%?
Yes |
Contact your service representative. |
No |
In the [Machine: Maintenance] group on the [Adjustment Settings for Skilled Operators] menu, execute 0502: [Execute Process Initial Setting]. |
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Decrease the value by 0.1% in 016: [Paper Transfer Feed Speed Adjustment].
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Repeat Steps 4 to 5. If the problem persists even if you lower the value to -0.5, perform the solution specified in Banding: General. |
