Previous
To identify the affected color, print three full-page, solid-fill A3 or DLT sheets for each of cyan, magenta, black, and green and three full-page, halftone A3 or DLT sheets for each of cyan, magenta, and yellow.
Because it is difficult to identify white spots on yellow, green is used instead of yellow.
Detach the photoconductor unit of the affected color and check the drum surface. Is the surface stained?
Yes |
Wipe the photoconductor unit with a dry rag to remove the stain. In the [Machine: Maintenance] group on the [Adjustment Settings for Skilled Operators] menu, execute 0501: [Execute Cleaning Initial Setting for PCU]. |
No |
Replace the photoconductor unit. |
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Replaced the PCU cleaning unit and the photoconductor unit. |
If the problem persists, contact your service representative.
For details about replacing the photoconductor unit, see Replacement Guide.
