Adjust the paper transfer voltage applied to Side 1 in Textured Paper mode when printing under the following conditions:
Printing in full color
Printing in full color including the clear toner while the special color is not set to high quality
Press [+] to increase the voltage and [-] to reduce it.
Setting Item |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|
[Txt Ppr: Paper Transfer Voltage: FC: Side 1] |
14.0 |
0.0 |
0.2 *1 |
kV |
*1 You can adjust the value in steps of 0.1 kV using from Web Image Monitor.