Machine: Image Position
For details about the following items, see Machine: Image Position.
Paper feed direction of printed copies differs depending on the setting. For details see Paper Feed Direction of Printed Copies (Side 1/Side 2).
No. |
Item |
Description |
---|---|---|
001 |
[Adj Image Position of Side1 Across Feed] |
Adjust the vertical position of the image to be printed on Side 1/Side 2 of the paper. |
002 |
[Adj Image Position of Side2 Across Feed] |
|
003 |
[Adj Image Position of Side1 With Feed] |
Adjust the horizontal position of the image to be printed on Side 1/Side 2 of the paper. |
004 |
[Adj Image Position of Side2 With Feed] |
|
005 |
[Adj Magnification of Side1 Across Feed] |
Adjust the vertical image scaling on the Side 1/Side 2 of the paper according to the paper expansion or shrinkage. |
006 |
[Adj Magnification of Side2 Across Feed] |
|
007 |
[Adj Magnification of Side1 With Feed] |
Adjust the horizontal image scaling on the Side 1/Side 2 of the paper according to the paper expansion or shrinkage. |
008 |
[Adj Magnification of Side2 With Feed] |
|
009 |
[Adj. Erase Margin of Leadg. Edge: Prod.] |
Adjust the mask width at the leading edge of the image. The setting specified in 010: [Adj. Erase Margin of Leadg. Edge: Qual.] is applied in the following cases:
|
010 |
[Adj. Erase Margin of Leadg. Edge: Qual.] |
|
011 |
[Adj. Erase Margin of Trailg. Edge: Prod.] |
Adjust the mask width at the trailing edge of the image. The setting specified in 012: [Adj. Erase Marg. of Trailg. Edge: Qual.] is applied in the following cases:
|
012 |
[Adj. Erase Marg. of Trailg. Edge: Qual.] |
|
013 |
[Deactivate Image Position Adjustment] |
Specify whether or not the machine automatically detects paper pathway deviations during the paper feeding process and adjusts the horizontal position of the print image accordingly. |
014 |
[Skew Detection] |
Specify whether or not to detect paper skew. |
Machine: Image Quality
For details about the following items, see Machine: Image Quality.
Paper feed direction of printed copies differs depending on the setting. For details see Paper Feed Direction of Printed Copies (Side 1/Side 2).
No. |
Item |
Description |
---|---|---|
015 |
[Transfer Timing Roller Feed Speed Adj] |
Adjust the transfer timing roller speed. |
016 |
[Paper Transfer Feed Speed Adjustment] |
Adjust the transfer roller speed. |
017 |
[Adjust Toner Adhesion (Black)] |
Adjust the toner adhesion to the intermediate transfer belt for each color. |
018 |
[Adjust Toner Adhesion (Cyan)] |
|
019 |
[Adjust Toner Adhesion (Mgenta)] |
|
020 |
[Adjust Toner Adhesion (Yellow)] |
|
021 |
[Adjust Toner Adhesion (Special)]*1 |
|
022 |
[Image Transfer Current: B&W] |
Adjust the current for the image transfer roller when printing in black and white. |
023 |
[Image Transfer Current: FC: Black] |
Adjust the current for the image transfer roller for each color mode in the following conditions:
|
024 |
[Image Transfer Current: FC: Cyan] |
|
025 |
[Image Transfer Current: FC: Magenta] |
|
026 |
[Image Transfer Current: FC: Yellow] |
|
027 |
[Image Transfer Current: FC: Special]*1 |
Adjust the current for the image transfer roller (special color) when printing in full color including the special color. |
028 |
[Image Transfer Current: Special]*1 |
Adjust the current for the image transfer roller (special color) when printing in the special color only. |
029 |
[Paper Transfer Current: B&W: Side 1] |
Adjust the current applied to the Side 1 of the paper when printing in black and white. |
030 |
[Paper Transfer Current: B&W: Side 2] |
Adjust the current applied to the Side 2 of the paper when printing in black and white. |
031 |
[Paper Transfer Current; Lead Edge: B&W] |
Adjust the current for the paper transfer roller at the leading edge of the paper when printing in black and white. |
032 |
[Ppr Transfer Current Lead Edg Dist: BW] |
Specify the area to apply current for the paper transfer roller at the leading edge of the paper when printing in black and white. |
033 |
[Paper Transfer Current; Trail Edge: B&W] |
Adjust the current for the paper transfer roller at the trailing edge of the paper when printing in black and white. |
034 |
[Ppr Transfer Current Trail Edg Dist: BW] |
Specify the area to apply the current for the paper transfer roller at the trailing edge of the paper when printing in black and white. |
035 |
[Paper Transfer Current: FC: Side 1] |
Adjust the paper transfer current applied to Side 1/Side 2 in the following conditions:
|
036 |
[Paper Transfer Current: FC: Side 2] |
|
037 |
[Paper Trnsfr. Current: FC: Side 1: Qual.] |
Adjust the paper transfer current applied to Side 1/Side 2 in the following conditions:
|
038 |
[Paper Trnsfr. Current: FC: Side 2: Qual.] |
|
039 |
[Paper Transfer Current; Lead Edge: FC] |
Adjust the current applied to the leading edge of the paper in the following conditions:
|
040 |
[Ppr Transfer Current Lead Edg Dist: FC] |
Specify the area to apply the current for the paper transfer roller at the leading edge of the paper in the following conditions:
|
041 |
[Paper Transfer Current; Trail Edge: FC] |
Adjust the current applied to the trailing edge of the paper in the following conditions:
|
042 |
[Ppr Transfer Current Trail Edg Dist: FC] |
Specify the area to apply the current for the paper transfer roller at the trailing edge of the paper in the following conditions:
|
043 |
[Paper Transfer Current: Special: Side 1]*1 |
Adjust the paper transfer current applied to Side 1/Side 2 when printing in the special color only. |
044 |
[Paper Transfer Current: Special: Side 2]*1 |
|
045 |
[Paper Transfer Current; Lead Edge: S]*1 |
Adjust the current applied to the leading edge of the paper when printing in the special color only. |
046 |
[Ppr Transfer Current Lead Edg Dist: S]*1 |
Specify the area to apply the current for the paper transfer roller at the leading edge of the paper when printing in the special color only. |
047 |
[Paper Transfer Current; Trail Edge: S]*1 |
Adjust the current applied to the trailing edge of the paper when printing in the special color only. |
048 |
[Ppr Transfer Current Trail Edg Dist: S]*1 |
Specify the area to apply the current for the paper transfer roller at the trailing edge of the paper when printing in the special color only. |
049 |
[Textured Paper Mode] |
Specify whether or not to enable textured paper mode. If this value is set to [On], the paper transfer voltage settings (050 - 057) are enabled. |
050 |
[Txt Ppr: Ppr Trns Voltage: B&W: Side 1] |
Adjust the paper transfer voltage applied to Side 1/Side 2 when printing in black and white with Textured Paper mode enabled. |
051 |
[Txt Ppr: Ppr Trns Voltage: B&W: Side 2] |
|
052 |
[Txt Ppr: Paper Trnsf Voltage: FC: Side 1] |
Adjust the paper transfer voltage applied to Side 1/Side 2 in Textured Paper mode when printing under the following conditions:
|
053 |
[Txt Ppr: Paper Trnsf Voltage: FC: Side 2] |
|
054 |
[Txt. Pp.: Pp. Trn. Vl.: FC: Sd. 1: Qul.] |
Adjust the paper transfer voltage applied to Side 1/Side 2 in Textured Paper mode when printing under the following conditions:
|
055 |
[Txt. Pp.: Pp. Trn. Vl.: FC: Sd. 2: Qul.] |
|
056 |
[Txt Ppr: Paper Trnsf Voltage: S: Side 1]*1 |
Adjust the paper transfer voltage applied to Side 1/Side 2 when printing in special color with Textured Paper mode enabled. |
057 |
[Txt Ppr: Paper Trnsf Voltage: S: Side 2]*1 |
|
058 |
[Paper Transfer Isolation Voltage: Side 1] |
Adjust the separation voltage for secondary transfer applied to Side 1/Side2. |
059 |
[Paper Transfer Isolation Voltage: Side 2] |
|
060 |
[Ppr Trns CV Start Timing: B&W: Side 1] |
Adjust the timing to start the constant voltage control for the bias during paper transfer applied to Side 1/Side2 when printing in black and white. |
061 |
[Ppr Trns CV Start Timing: B&W: Side 2] |
|
062 |
[Ppr Trns CV Cntrl Duratn: B&W: Side 1] |
Adjust the duration of the constant voltage control for the bias during paper transfer applied to Side 1/Side 2 when printing in black and white. |
063 |
[Ppr Trns CV Cntrl Duratn: B&W: Side 2] |
|
064 |
[Ppr Trnsf Cnstnt Voltage: B&W: Side 1] |
Adjust the constant voltage control for the bias applied to the Side 1/Side 2 when printing in black and white. |
065 |
[Ppr Trnsf Cnstnt Voltage: B&W: Side 2] |
|
066 |
[Ppr Trns CV Start Timing: FC: Side 1] |
Adjust the timing to start the constant voltage control for the bias during paper transfer applied to Side 1/Side 2 in the following conditions:
|
067 |
[Ppr Trns CV Start Timing: FC: Side 2] |
|
068 |
[Ppr Trns CV Cntrl Duratn: FC: Side 1] |
Adjust the duration of the constant voltage control for the bias during paper transfer applied to Side 1/Side 2 in the following conditions:
|
069 |
[Ppr Trns CV Cntrl Duratn: FC: Side 2] |
|
070 |
[Ppr Trnsf Constant Voltage: FC: Side 1] |
Adjust the constant voltage control for the bias applied to the Side 1/Side 2 in the following conditions:
|
071 |
[Ppr Trnsf Constant Voltage: FC: Side 2] |
|
072 |
[Ppr Trns CV Start Timing: S: Side 1]*1 |
Adjust the timing to start the constant voltage control for the bias during paper transfer applied to Side 1/Side2 when printing in the special color only. |
073 |
[Ppr Trns CV Start Timing: S: Side 2]*1 |
|
074 |
[Ppr Trns CV Cntrl Duratn: S: Side 1]*1 |
Adjust the duration of the constant voltage control for the bias during paper transfer applied to Side 1/Side 2 when printing in the special color only. |
075 |
[Ppr Trns CV Cntrl Duratn: S: Side 2]*1 |
|
076 |
[Ppr Trnsf Constant Voltage: S: Side 1]*1 |
Adjust the constant voltage control for the bias applied to the Side 1/Side 2 when printing in the special color only. |
077 |
[Ppr Trnsf Constant Voltage: S: Side 2]*1 |
|
078 |
[Adjust Gap of Paper Transfer] |
Adjust the gap between the intermediate transfer belt and the paper transfer roller when the paper is fed through the paper transfer roller. |
079 |
[Adj Contact Timing of Ppr Trns: Small] |
Adjust the timing for the intermediate transfer belt and the paper transfer unit to come into contact when adjusting paper transfer gaps. |
080 |
[Adj Contact Timing of Ppr Trns: Large] |
|
081 |
[Adj Contact Timng of Ppr Trns: Sml/Lrg] |
|
082 |
[Adj Diseng Timing of Ppr Trns: Small] |
Adjust the timing for the intermediate transfer belt and the paper transfer unit to separate when adjusting paper transfer gaps. |
083 |
[Adj Diseng Timing of Ppr Trns: Large] |
|
084 |
[Adj Diseng Timing of Ppr Trns: Sml/Lrg] |
|
085 |
[Fusing Heat Roller Temp. Adjust.: Prod.] |
Adjust the heat roller temperature. The setting specified in 086: [Fusing Heat Roller Temp. Adjust.: Qual.] is applied in the following cases:
|
086 |
[Fusing Heat Roller Temp. Adjust.: Qual.] |
|
087 |
[Fusing Pressr. Rllr. Temp. Adjst.: Prod.] |
Adjust the pressure roller temperature. The setting specified in 088: [Fusing Pressr. Rllr. Temp. Adjst.: Qual.] is applied in the following cases:
|
088 |
[Fusing Pressr. Rllr. Temp. Adjst.: Qual.] |
|
089 |
[Adj Fsng Tmp to Trnsf Ppr: Ppr: Prod] |
Specify the fusing temperature to feed paper after warm-up to print without using the special color. If the fusibility throughput setting*2 is set to give higher priority to throughput, the setting specified in 089: [Adj Fsng Tmp to Trnsf Ppr: Ppr: Prod] is applied. |
090 |
[Adj Fsng Tmp to Trnsf Ppr: Ppr: Qual] |
|
091 |
[Adj Fsng Tmp to Trnsf Ppr: Ppr: Prod: S]*1 |
Specify the fusing temperature condition to feed paper after warm-up to print in special color mode. If the fusibility throughput setting*2 is set to give higher priority to throughput, the setting specified in 091: [Adj Fsng Tmp to Trnsf Ppr: Ppr: Prod: S] is applied. |
092 |
[Adj Fsng Tmp to Trnsf Ppr: Ppr: Qual: S]*1 |
|
093 |
[Adjust Adding Fusing Temperature 1] |
Adjust the temperature applied to the fusing unit at the start of paper transfer. When printing in special color mode, the setting specified in 094: [Adjst Addng Fusng Tempratre 1: Special] is applied. |
094 |
[Adjst Addng Fusng Tempratre 1: Special]*1 |
|
095 |
[Adjust Adding Fusing Temperature 2] |
Adjust the temperature applied to the fusing unit immediately before the start of paper transfer. When printing in special color mode, the setting specified in 096: [Adjst Addng Fusng Tempratre 2: Special] is applied. |
096 |
[Adjst Addng Fusng Tempratre 2: Special]*1 |
|
097 |
[Fusing Nip Width Setting: Productivity] |
Adjust the nip width between the fusing belt and the pressure roller (not applied to envelopes). The setting specified in 098: [Fusing Nip Width Setting: Quality] is applied in the following cases:
|
098 |
[Fusing Nip Width Setting: Quality] |
|
099 |
[Adjust Cleang. Web Mtr. Intrvl.: Prod.] |
Specify the interval between each activation of the cleaning web. The setting specified in 100: [Adjust Cleang. Web Mtr.Intrvl.: Qual.] is applied in the following cases:
|
100 |
[Adjust Cleang. Web Mtr. Intrvl.: Qual.] |
|
101 |
[Fusing Nip Width Adj. for Envelope] |
Adjust the nip width between the fusing belt and the pressure roller when an envelope is being fed. |
102 |
[Fusr Blt Smthng: Ppr Typ/Wt Coef: Prod] |
Adjust the intervals to clean the fusing belt automatically by using the fusing belt smoothing roller. The setting specified in 103: [Fusr Blt Smthng: Ppr Typ/Wt Coef: Qual] is applied in the following cases:
|
103 |
[Fusr Blt Smthng: Ppr Typ/Wt Coef: Qual] |
*1 This function is available for Pro C7100X, Pro C7110X, Pro C7100SX, and Pro C7110SX.
*2 For details about the fusibility throughput setting, contact your service representative.
Machine: Paper Feed/ Output
For details about the following items, see Machine: Paper Feed/ Output.
Paper feed direction of printed copies differs depending on the setting. For details see Paper Feed Direction of Printed Copies (Side 1/Side 2).
No. |
Item |
Description |
---|---|---|
104 |
[Fusing Feed Speed Adjustment] |
Adjust the fusing roller's speed. |
105 |
[Decurler Feed Speed Adj: Curl Adj Off] |
Adjust the paper feed speed of the decurler unit when 0304: [Adjust Paper Curl] in the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled Operators] menu is set to "Off". |
106 |
[Decurler Feed Speed Adj: Curl Adj Weak] |
Adjust the paper feed speed of the decurler unit when 0304: [Adjust Paper Curl] in the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled Operators] menu is set to "Weak". |
107 |
[Decurler Feed Speed Adj: Curl Adj Strg] |
Adjust the paper feed speed of the decurler unit when 0304: [Adjust Paper Curl] in the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled Operators] menu is set to "Strong". |
108 |
[Wide LCT Fan Setting] |
Specify how the three-tray wide LCT (LCIT RT5090) fan moves. |
109 |
[Adjust Wide LCT Fan Level] |
Adjust the capacity of the three-tray wide LCT (LCIT RT5090) fan. |
110 |
[Pickup Assist Setting] |
Adjust the contact time of the paper feed rollers of the machine's paper trays (Trays 1 and 2), bypass tray, and three-tray wide LCT (LCIT RT5090). |
111 |
[Updraft Fan] |
Adjust the airflow of the updraft fan of the two-tray wide LCT (Vacuum Feed LCIT RT5100). |
112 |
[Blower Fan] |
Adjust the airflow of the blower fan of the two-tray wide LCT (Vacuum Feed LCIT RT5100). |
113 |
[Side Fan] |
Adjust the airflow of the side fan of the two-tray wide LCT (Vacuum Feed LCIT RT5100). |
114 |
[Vacuum Fan] |
Adjust the airflow of the vacuum fan of the two-tray wide LCT (Vacuum Feed LCIT RT5100). |
115 |
[Updraft Fan Shutter] |
Specify how the updraft/blower fan shutter of the two-tray wide LCT (Vacuum Feed LCIT RT5100) moves. |
116 |
[Side Fan Shutter] |
Specify how the side fan shutter of the two-tray wide LCT (Vacuum Feed LCIT RT5100) moves. |
117 |
[Switch Paper Load Upper Limit] |
Switch the upper limit for sheets of paper to be loaded in the two-way wide LCT (Vacuum Feed LUIT RT5100). |
118 |
[Paper Feed Mode (Adjust Fan Level)] |
Specify how the two-tray wide LCT (Vacuum Feed LCIT RT5100) fan moves. |
119 |
[Double Feed Detection] |
Specify whether or not to detect double feeding of paper. |
120 |
[Illumin. Mode for Color Paper Detctn.] |
Adjust the luminance of the paper edge detection sensor. |
121 |
[Color Paper Edge Detection Adjustment] |
Adjust the luminance of the paper edge detection sensor. |
122 |
[Regist Jam Detection with Feed Dir] |
Specify whether or not to stop printing if the horizontal misalignment of the delivered paper exceeds the adjustable range (3 mm/0.1 inch). |
123 |
[Exit Motor Feed Speed Adjustment] |
Adjust the exit motor's speed. |
124 |
[Switchback Entrance Feed Speed Adj] |
Adjust the paper feed speed at the switchback entrance. |
125 |
[Switchback Exit Feed Speed Adj] |
Adjust the paper feed speed at the switchback exit. |
126 |
[Ppr Fd Sttg for 2 Sd Sml Siz Thckst Ppr] |
Adjust throughput when performing duplex printing using A4 or letter-size (81/2" × 11") paper or custom paper with a length of 210.0 to 215.9 mm. |
Machine: Productivity
For details about the following items, see Machine: Productivity.
No. |
Item |
Description |
---|---|---|
127 |
[Process Speed Setting: Productivity] |
Adjust the machine's operating speed. The setting specified in 128: [Process Speed Setting: Quality] is applied in the following cases:
|
128 |
[Process Speed Setting: Quality] |
|
129 |
[Paper Feed Interval Setting: Productivity] |
Adjust the interval between the feeding of each sheet. The setting specified in 130: [Paper Feed Interval Setting: Quality] is applied in the following cases:
|
130 |
[Paper Feed Interval Setting: Quality] |
|
131 |
[Rdc. Init. CPM: Low Tmp. Envir.: Prod.] |
Adjust the level of reducing the print speed at the start of paper transfer in low-temperature environments. The setting specified in 132: [Rdc. Init. CPM: Low Tmp. Envir.: Qual.] is applied in the following cases:
|
132 |
[Rdc. Init. CPM: Low Tmp. Envir.: Qual.] |
|
133 |
[Rdc. In. CPM: N./H. Temp. Envr.: Prod.] |
Adjust the level of reducing the print speed at the start of paper transfer in normal room temperature and higher temperature environments. The setting specified in 134: [Rdc. In. CPM: N./H.Temp. Envr.: Qual.] is applied in the following cases:
|
134 |
[Rdc. In. CPM: N./H. Temp. Envr.: Qual.] |
Finishing: Fold
For details about the following items, see Finishing: Fold.
Paper feed direction of printed copies differs depending on the setting. For details see Paper Feed Direction of Printed Copies (Side 1/Side 2).
No. |
Item |
Description |
---|---|---|
135 |
[Adjust Z-fold Position 1] |
Adjust the width of the bottom end segment of Z-folded sheets when using the multi-folding unit. |
136 |
[Adjust Z-fold Position 2] |
Adjust the overall fold size of Z-fold sheets when using the multi-folding unit. |
137 |
[Half Fold Position: Single-sheet Fold] |
Adjust the fold position of half fold sheets when using the multi-folding unit. |
138 |
[Letter Fold-out Posn 1: Single-sheet Fld] |
Adjust the fold position for the bottom segment of letter fold-out sheets when using the multi-folding unit. |
139 |
[Letter Fold-out Posn 2: Single-sheet Fld] |
Adjust the overall fold size of letter fold-out sheets when using the multi-folding unit. |
140 |
[Letter Fold-in Posn 1: Single-sheet Fold] |
Adjust the fold position of the bottom segment of letter fold-in sheets when using the multi-folding unit. |
141 |
[Letter Fold-in Posn 2: Single-sheet Fold] |
Adjust the overall fold size of letter fold-in sheets when using the multi-folding unit. |
142 |
[Double Parallel Fold Position 1] |
Adjust the fold position of the bottom segment 1 of double parallel folded sheets when using the multi-folding unit. |
143 |
[Double Parallel Fold Position 2] |
Adjust the fold position of the bottom segment 2 of double parallel folded sheets when using the multi-folding unit. |
144 |
[Adjust Gate Fold Position 1] |
Adjust the fold width of the bottom segment 1 of gate folded sheets when using the multi-folding unit. |
145 |
[Adjust Gate Fold Position 2] |
Adjust the fold width of the bottom segment 2 of gate folded sheets when using the multi-folding unit. |
146 |
[Adjust Gate Fold Position 3] |
Adjust the fold position of the bottom segment 3 of gate folded sheets when using the multi-folding unit. |
[Registration to Align Front and Back Images Using Template]
No. |
Item |
Description |
---|---|---|
- |
[Registration to Align Front and Back Images Using Template] |
Adjust the image position so it is the same on either side of the paper. For details see the "Troubleshooting". |