Previous
This function is available for Pro C7100S, Pro C7110S, Pro C7100SX, and Pro C7110SX.
Adjust the position and scaling applied to scanned images when using the Auto Document Feeder (ADF).
By specifying this setting, you can correct image misalignment, expansion, and shrinkage due to non-uniform paper feeding.
In [Adjust Image Position of Side 1 With Feed Dir], adjust the position of the image on side 1 parallel to the paper feed direction. Press [+] to shift the image to the left (leading edge) or [－] to shift it to the right (trailing edge).
In [Adjust Image Position of Side 2 With Feed Dir], adjust the position of the image on side 2 parallel to the paper feed direction. Press [+] to shift the image to the right (leading edge) or [－] to shift it to the left (trailing edge).
In [Adjust Magnification With Feed Direction], adjust the horizontal image scaling on sides 1 and 2. Press [+] to reduce the scaling and [－] to increase it.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|---|
[Adjust Image Position of Side 1 With Feed Dir] |
0.0 |
5.0 |
-5.0 |
0.1 |
mm |
[Adjust Image Position of Side 2 With Feed Dir] |
|||||
[Adjust Magnification With Feed Direction] |
% |
