Previous
Adjust the set fusing temperature according to the machine status.
To achieve proper fusing when printing, the machine adjusts the temperature of the heating roller according to the paper type or thickness. You can reduce the wait time during which the machine makes this adjustment by changing the temperature in effect during standby.
In "Temperature on Standby Mode", specify the fusing temperature in standby mode (when the panel is lit and the machine is ready for immediate operation).
In "Temperature on Panel Off Mode", specify the fusing temperature in energy saver mode.
In "Temperature on Low Power Mode", specify the fusing temperature in low power mode.
In "Temperature Before Performing Process", you can specify the fusing temperature applied when the machine is accessed from the control panel or when the machine is receiving print jobs.
Depending on the machine's other settings, changing this setting might increase the waiting time before a process is performed.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|---|
[Heat Roller: Temperature on Standby Mode] |
145 |
200 |
0 |
1 |
degree(s) |
[Heat Roller: Temperature on Panel Off Mode] |
|||||
[Heat Roller: Temperature Before Performing Process] |
140 |
||||
[Pressure Roller: Temperature on Standby Mode] |
90 |
||||
[Pressure Roller: Temperature on Panel Off Mode] |
|||||
[Pressure Roller: Temperature on Low Power Mode] |
|||||
[Pressure Roller: Temperature Before Performing Process] |
|||||
[Pressure Roller Temperature After Reload/ Paper Transfer] |
|||||
[Reload Permit: Pressure Roller Temperature] |
|||||
[Reload Permit: Pressure Roller Temp. Delta: New Day Recovery] |
20 |
||||
[Reload Permit: Pressure Roller Temp. Delta: Panel Off Recovery] |
|||||
[Reload Permit: Pressure Roller Temp. Delta: Paper Trans. Recov.] |
|||||
[Pressure Roller Cooling Fan: Operation Duty 1] |
35 |
100 |
20 |
% |
|
[Pressure Roller Cooling Fan: Operation Duty 2] |
20 |
||||
[Pressure Roller Cooling Fan: Operation Duty 3] |
80 |
