This section explains how you can check the machine's status and the items displayed. Depending on the options installed on the machine, some items might not be displayed.
UNIX: Use the "stat" parameter and the "rsh", "rcp", "ftp", and "sftp" commands. "rsh" and "rcp" cannot be used in a Windows environment.
telnet: Use the "status" command.
Messages |
Description |
---|---|
Add staples (Booklet: Back) |
The staple of booklet finisher (back) is exhausted. |
Add staples (Booklet: Both) |
The staple of booklet finisher is exhausted. |
Add staples (Booklet: Front) |
The staple of booklet finisher (front) is exhausted. |
Adjusting Bind-glue Temperature |
The machine is adjusting the binding glue temperature. |
Adjusting… |
The machine is initializing or calibrating. |
Canceling Job... |
The job is being reset. |
Configuring... |
Setting is being changed. |
Cover Open: 2nd LCT Bridge Unit |
Second LCT Bridge Unit Cover is open. |
Cover Open: 2nd LCT Front L. |
Second LCT Front Left Cover is open. |
Cover Open: 2nd LCT Front R. |
Second LCT Front Right Cover is open. |
Cover Open: 3rd LCT Front L. |
Third LCT Front Left Cover is open. |
Cover Open: Binder Interposer |
Perfect Binder Interposer unit is open. |
Cover Open: Binder Interps Cver |
Perfect Binder Interposer Cover is open. |
Cover Open: Finisher Front |
Finisher Front Cover is open. |
Cover Open: Front Cover |
The front cover is open. |
Cover Open: Interposer Base |
Interposer Base Cover is open. |
Cover Open: LCT Bridge Unit |
LCT Bridge Unit Cover is open. |
Cover Open: LCT Front Right |
LCT Front Right Cover is open. |
Cover Open: PerfectBinder Front |
Perfect Binder Front Right Cover is open. |
Cover Open: PerfectBinderL Tray |
Perfect Binder Lower Left Tray is pulled out. |
Cover Open: PerfectBinderR Tray |
Perfect Binder Lower Right Tray is open. |
Cover Open: Ring Binder Front |
Ring Binder Front Right Cover or Ring Binder Front Left Cover is open. |
Cover Open: Ring Binder Tray |
Ring Binder Tray is pulled out. |
Cover Open: Stacker Upper Cover |
The Stacker Upper Cover is open. |
Cover Open: Tray A |
The Tray A slide cover is open. |
Cover Open: Trimmer Front Cover |
Trimmer Front Cover is open. |
Cover Open: Wide LCT Front |
Wide LCT Front Cover is open. |
Cover Open: Wide LCT Front Left |
Wide LCT Front Cover is open. |
Cover Open:BufferPassUnit Front |
The front cover of Buffer Pass Unit is open. |
Cover Open:FoldUnit Front Cover |
Folding Unit Front Cover is open. |
Cover Open:Interposer Right |
Interposer Right Cover is open. |
Cover Open:Perfect Bndr. Top L. |
The upper cover of Perfect Binder Interposer Upper Tray is open. |
Cover Open:Second Stacker Front |
The Second Stacker Upper Cover is open. |
Cover/Tray not Set: 2nd Stacker |
Second Stacker Front Cover is open, or the carriage of Second Stacker is pulled out, or the down button of Stacker is pushed. |
Cover/Tray not Set: Stacker |
Stacker Front Cover is open, or the carriage of Stacker is pulled out, or the down button of Stacker is pushed. |
Current Job Suspended |
The current job is suspended. |
Cvr. Open:Perfect Bindr. Bridge |
Bridge Unit Front Cover is open. |
Empty: Black Toner |
The black toner cartridge is almost empty. |
Empty: Black Toner Cartridge |
The black toner bottle is empty. |
Empty: Cyan Toner |
The cyan toner cartridge is almost empty. |
Empty: Cyan Toner Cartridge |
The cyan toner bottle is empty. |
Empty: Magenta Toner |
The magenta toner cartridge is almost empty. |
Empty: Magenta Toner Cartridge |
The magenta toner bottle is empty. |
Empty: Yellow Toner |
The yellow toner cartridge is almost empty. |
Empty: Yellow Toner Cartridge |
The yellow toner bottle is empty. |
Energy Saver Mode |
The machine is in Energy Saver mode. |
Error: PDL |
An error has occurred in the page description language. |
Full: Comb Hole Punch Receptcl |
Punch Chip receptacle for Ring Binder is full. |
Full: Finisher Booklet Tray |
Finisher Booklet Tray is full. |
Full: Finisher Shift Tray |
Finisher Shift Tray is full. |
Full: Finisher Upper Tray |
Finisher Upper Tray is full. |
Full: Folding Unit Tray |
Folding Unit Tray is full. |
Full: Hole Punch Receptacle |
Punch Chip receptacle for hole punch is full. |
Full: Perfect Binder Low-L Tray |
Perfect Binder Lower Left Tray is full. |
Full: Ring Binder Tray |
Ring Binder Tray is full. |
Full: Second Stacker Tray |
Second Stacker Tray is full. |
Full: Stacker Tray |
Stacker Tray is full. |
Full: Stacker Upper Tray |
Stacker Upper Tray is full. |
Full: Trimmer Waste Paper Box |
Waste Paper Receptacle is full. |
Full: Waste Paper Receptacle |
Perfect Binder Lower Right Tray is full. |
Full: Waste Staples |
The waste staples are full. |
Full: Waste Toner |
Waste Toner Bottle is full. |
Hex Dump Mode |
It is a hex dump mode. |
In Use: Finisher |
Other function is using Finisher. |
In Use: Folding Unit |
Other function is using Folding Unit. |
In Use: Input Tray |
Other function is using the paper tray. |
In Use: Perfect Binder |
Other function is using Perfect Binder. |
In Use: Ring Binder |
Other function is using Ring Binder. |
In Use: Staple Unit |
Other function is using the staple unit. |
Independent-supplier Toner |
Toner cartridges other than genuine ones are set. |
Jobs Suspended |
All jobs are suspended. |
Loading Toner… |
Toner is being supplied. |
Low Power Mode |
The machine is in Low Power mode. |
Low: Black Toner |
The black toner cartridge is not set correctly, or toner is almost running out. |
Low: Cyan Toner |
The cyan toner cartridge is not set correctly, or toner is almost running out. |
Low: Magenta Toner |
The magenta toner cartridge is not set correctly, or toner is almost running out. |
Low: Yellow Toner |
The yellow toner cartridge is not set correctly, or toner is almost running out. |
Malfunction: Booklet Processor |
There is a problem with Booklet Processor. |
Mismatch: Paper Size |
Indicated paper tray does not contain paper of selected size. |
Mismatch: Paper Size and Type |
Indicated paper tray does not contain paper of selected size and type. |
Mismatch: Paper Type |
Indicated paper tray does not contain paper of selected type. |
Multiple Printing Sheet Feed |
If multiple sheets are fed at the same time, the machine outputs the sheets from the nearest output tray and an alert message appears on the control panel. |
Near Replenishing: Binding Glue |
The binding glue of Perfect Binder is almost empty. |
Nearly Full: Waste Toner |
Waste Toner Bottle is nearly full. |
Need more Staples |
Stapler has almost run out of staples. |
No Paper: Binder Interps L-tray |
There is no paper in Perfect Binder Interposer Lower Tray. |
No Paper: Binder Interps U-tray |
There is no paper in Perfect Binder Interposer Upper Tray. |
No Paper: Selected Tray |
There is no paper in the specified tray. |
Not Detected: Fuser Unit |
The fusing unit is not correctly set. |
Not Detected: Input Tray |
There is no paper in the specified tray or the paper tray is not correctly set. |
Not Detected: Tab Stock |
The tab stock paper needs to be aligned to the original position. |
Not Detected: WasteToner Bottle |
Waste Toner Bottle is not correctly set. |
Not Set Properly: BindRing Comb |
An error occurs in Ring Binder due to one of the following:
|
Offline |
Machine is offline. |
Paper in Duplex Unit |
The paper remains in the duplex unit. |
Paper in Finisher |
The paper remains in Finisher. |
Paper in Folding Unit |
The paper remains in Folding Unit. |
Paper in Second Stacker Tray |
The paper remains in Second Stacker Tray. |
Paper in Stacker Tray |
The paper remains in Stacker Tray. |
Paper Misfeed: Buffer Pass Unit |
The paper has jammed in.Buffer Pass Unit. |
Paper Misfeed: Folding Unit |
The paper has jammed in Folding Unit. |
Paper Misfeed: Input Tray |
The paper has jammed in the paper tray. |
Paper Misfeed: Internal Tray |
The paper has jammed in the internal paper feed section. |
Paper Misfeed: Interposer |
The paper has jammed in the interposer or twin interposer. |
Paper Misfeed: Perfect Binder |
The paper has jammed in Perfect Binder |
Paper Misfeed: Ring Binder |
The paper has jammed in Ring Binder. |
Paper Misfeed: Second Stacker |
The paper has jammed in Second Stacker. |
Paper Misfeed: Stacker |
The paper has jammed in Stacker. |
Paper Misfeed: Trimmer |
The paper has jammed in Trimmer. |
Paper Misfeed:Booklet Processor |
The paper has jammed in Booklet Processor. |
Paper on Middle Stacker |
The paper remains in Middle Stacker. |
Paper on Ring Bind Aligner Tray |
The paper remains in Aligner Tray. |
Perfect Binding in process |
Perfect Binder is outputting. |
Printing... |
Printing is in progress. |
Ready |
The machine is ready to print. |
Renewing Remote Certificate |
The remote certificate is being renewed. |
Replenish Binding Glue |
The binding glue of Perfect Binder is empty. |
Replenish Binding Ring Combs |
The Ring Binder has run out of the ring. |
Suspend / Resume Key Error |
The stop button of the finisher was pressed. |
Tray Error: Chaptering |
The paper feed tray specification error has occurred because chaptering as well as the normal paper use the same tray for printing. |
Tray Error: Duplex Printing |
Selected paper tray cannot be used for duplex printing. |
Warming Up... |
The machine is warming up. |
Check the error contents that may be printed in the configuration page.