The following sizes and orientations of originals are detected automatically:
(mainly Europe and Asia)
Original location |
A3 |
B4 JIS |
A4 |
B5 JIS |
A5 |
A5 |
B6 JIS |
---|---|---|---|---|---|---|---|
Exposure glass |
|
|
|
|
|
×*1,*3 |
× |
ADF |
|
Original location |
11 × 17 |
81/2 × 11 |
81/2 × 13 |
---|---|---|---|
Exposure glass |
× |
×*2 |
|
ADF |
|
|
|
: Detectable size, ×: Undetectable size
*1 If you want to switch the detectable sizes from these sizes to 8K and 16K, contact your service representative.
*2 Default is A4. If you want to switch the detectable size from A4 to 81/2 × 11, contact your service representative.
*3 If you want to make A5 size detectable, contact your service representative.
*4 You cannot use the two-sided scanning mode.
*5 Default is 11 × 17. If you want to switch the detectable size from 11 × 17 to 8K, contact your service representative.
*6 Default is 81/2 × 11. If you want to switch the detectable size from 81/2 × 11 to 16K, contact your service representative.
*7 Default is 81/2 × 13. If you want to switch the detectable size from 81/2 × 13 to 81/4 × 13 or 8 × 13, contact your service representative.
(mainly North America)
Original location |
11 × 17 |
81/2 × 14 |
81/2 × 11 |
81/2 × 11 |
51/2 × 81/2 |
51/2 × 81/2 |
---|---|---|---|---|---|---|
Exposure glass |
|
|
×*6 |
|||
ADF |
|
|
|
|
Original location |
10 × 14 |
71/4 × 101/2 |
A3 |
A4 |
---|---|---|---|---|
Exposure glass |
× |
× |
× |
×*3 |
ADF |
: Detectable size, ×: Undetectable size
*1 Default is 11 × 17. If you want to switch the detectable size from 11 × 17 to 11 × 15, contact your service representative.
*2 Default is 81/2 × 14. If you want to switch the detectable size from 81/2 × 14 to 81/2 × 13, contact your service representative.
*3 Default is 81/2 × 11. If you want to switch the detectable size from 81/2 × 11 to A4, contact your service representative.
*4 Default is 81/2 × 11. If you want to switch the detectable size from 81/2 × 11
to 71/4 × 101/2
, contact your service representative.
*5 Default is 81/2 × 11. If you want to switch the detectable size from 81/2 × 11
to 8 × 10
, contact your service representative.
*6 If you want to make 51/2 × 81/2 size detectable, contact your service representative.
Originals whose size is non-auto detectable will be scanned at the wrong paper size if fed in from the ADF.
If the size of your original cannot be detected automatically, you must specify its size. If the size is not specified, part of the image may be cropped or not output satisfactorily. For details about how to specify the size of the originals, see "Specifying Original Sizes", Copy/ Document Server or "Specifying Scan Settings", Scan.