Previous
The machine assembles copies as sets in sequential order.
Sort/Shift Sort
Copies are assembled as sets in sequential order.
To use Shift Sort, a finisher or high capacity stacker is required. Each time the copies of one set or a job are delivered, the next copy is shifted to separate each set or job.
Select the Sort function (
) under [Sort / Stack].
Enter the number of copy sets using the number keys.
Place the originals.
To confirm the type of finishing, press the [Sample Copy] key.
Press the [Start] key.
If you are copying from the exposure glass, a single copy of each original is made first. If the first copy set is acceptable, you can make the remaining copy sets by pressing the [
] key. The time required for copy sets to be delivered varies depending on the print settings.When the number of copies exceeds capacity, copying stops. If this happens, remove copies from the tray to resume copying.
For details about the number of copy sheets that the output tray can accommodate, and paper sizes and orientations that can be shifted when delivered to the shift tray, see "Specifications", Maintenance and Specifications.
You can change the settings for the Sort function under [Input / Output] in User Tools. For details, see Input / Output.
To specify whether or not sets are shifted, use the [Output/ Cstmz.] tab or the [Input / Output] setting in User Tools. For details, see Shift tray off in sort/stack or Input / Output.
