Skip header
 

Reverse Orientation

This function rotates the copy image by 180 degrees (Operation panel screen illustration or Operation panel screen illustration).

This is useful for copying torn originals. For example, if the left side of the original is damaged and is difficult to set, position it as shown below.

Illustration of reverse orientation

1Press [Special Original].

Operation panel screen illustration

2Press [Reverse Orientation].

3Select the original orientation, and then press [OK].

Operation panel screen illustration

Note

  • It is recommended that you use this function together with the Auto Paper Select or Auto Reduce / Enlarge function.

  • Copy results may differ depending on the combination of selected functions.

PreviousNext