Skip header
 

Printer Features

Select [Printer Features] in the pop-up menu to change the specific printer settings.

The available items and settings may differ depending on the printer model and attached options. The display for the printer functions can be switched by selecting the [Feature Sets:] list.

  1. Fit to Paper:

    The document is automatically reduced or enlarged to fit the paper size selected.

    • Prompt User

      The print job is performed with the same size of the document to be printed.

    • Nearest Size and Scale

      If the paper size is smaller than the selected paper size, the driver reduces the print size. If the paper size is larger than the size of document to be printed, the print job is not adjusted to fit the paper size.

    • Nearest Size and Crop

      The print job is performed regardless of any differences between the selected and actual paper size. However, the print job is not adjusted to fit the paper size.

  2. Resolution

    Select a resolution. A higher resolution will result in better print quality, but printing may take longer.

  3. Print Mode:

    Select whether or not to conserve toner when printing.

    • Off

      Suitable for images such as photographs that contain fine tone gradation.

    • Toner Saving 1

      Reduces the amount of toner used when printing.

    • Toner Saving 2

      Further reduces the amount of toner used when printing (a greater reduction than when [Toner Saving 1] is selected). This increases the life of the toner cartridge, but the output appears slightly lighter.

  4. Image Smoothing:

    Select whether or not to perform image smoothing, or specify the threshold resolution to apply smoothing.

  5. Dithering:

    Select a dithering pattern suitable for the document image.

    • Auto

      Automatically configures the best dithering method depending on the appearance of the document to print.

    • Photographic

      Performs dithering using a pattern appropriate for photographs.

    • Text

      Performs dithering using a pattern appropriate for text.

    • User Setting

      Select this when printing images set in half tone in your application.

  6. Paper Type:

    Select the paper type to use.

  7. Rotate by 180 degrees:

    Select whether or not to rotate the image by 180 degrees when printing.

  8. Orientation Override:

    Select this setting when paper orientation cannot be specified in some applications. If data is rotated in an undesired direction on the output page, use this setting to specify the data orientation to be applied when printing.

  9. Watermark:

    Set the Watermark function.

  10. Watermark Text:

    Select the Watermark text type.

  11. Watermark Font:

    Select the Watermark font type.

  12. Watermark Size:

    Select the Watermark size.

  13. Watermark Angle:

    Select the Watermark angle.

  14. Watermark Style:

    Select the Watermark style.

PreviousNext