Previous
Print Error Report
Select this to have an error report printed when a printer or memory error occurs.
Default: [Off]
Emulation SW
The printer detects the type of data sent and automatically selects the emulation to be used.
Default: [On]
On
Off
Priority Emulation
You can specify the emulation that is automatically called when the main power is turned on.
This setting is available when [Emulation SW] is set to [Off].
The printer prints any data received from a computer using the specified emulation.
Default: [PCL]
PCL
PS3
Memory Usage
You can specify whether or not to use memory from Font Priority or Frame Priority.
Default: [Frame Priority]
Font Priority
Allocates more memory to the PDL work area. Select this setting if printing fails due to insufficient memory.
Frame Priority
Allocates more memory for image processing. Select this setting to increase print speed. Depending on the document you are printing, this setting might not be effective.
Copies
You can specify the number of copies to print.
If the number of copies to print is specified by command or the printer driver, this setting is overridden.
Default: 1
1 to 999
Rotate by 180 Degrees
Specify whether to rotate the print image 180 degrees relative to the paper orientation.
Default: [Off]
On
Off
Sub Paper Size
You can specify whether or not the paper size switches automatically when paper of the specified size is not loaded in the tray.
This feature supports automatic switching between A4 and Letter (8 1/2" x 11") size paper only.
Paper switching may crop page edges and other undesirable print results. This is due to the difference between A4 and Letter (8 1/2" x 11") in the maximum printable area.
Default: [Auto]
Auto
Off
Toner Saving
Reduces toner consumption when printing. When this setting is enabled, print quality may be degraded.
Default: [Off]
On
Off
Letterhead Setting
Select whether or not to print on paper that has a fixed print side or print direction (letterhead paper, for example). For details, see "Loading Orientation-Fixed Paper or Two-Sided Paper", Paper Specifications and Adding Paper.
Default: [Off]
Off
Not printing with the letterhead printing mode.
Auto Detect
Select whether or not to print using letterhead mode whenever a page that has a fixed print side or print direction is specified as the first page.
Tray Setting Priority
You can specify whether or not the paper size and type settings that are applied are those specified using the control panel, printer driver, or print command.
Bypass Tray
You can specify whether or not the paper size and type settings applied for the bypass tray are those specified using the control panel, printer driver, or print command.
Default: [Driver/Command]
Driver/Command
When the source paper tray is specified for a print job, the paper settings specified using the printer driver or by print command are applied, regardless of any settings specified using the control panel.
Machine Setting(s)
The paper settings specified on the printer's control panel are applied to all print jobs. An error may occur if the paper settings specified using the printer driver or by print command do not match those specified using the control panel.
Machine Settg(s): Any Type
If this setting is selected for a print job and the type of the document for the print job does not need to be specified, you can print only if the paper size matches the job's print setting.
To use this function, the following conditions must be met:
Set [APS] in [Paper Type:Bypass Tray] under [Tray Paper Settings] to [On].
[Auto Tray Select] is selected for the input tray setting in the printer driver.
Any Size/Type
If the printer's trays do not contain any paper to match the print job settings, printing can be performed from the bypass tray with the job's settings applied.
To use this function, the following conditions must be met:
Set [APS] in [Paper Type:Bypass Tray] under [Tray Paper Settings] to [On].
[Auto Tray Select] is selected for the input tray setting in the printer driver.
Any Custom Size/Type
If the printer's trays do not contain any paper to match the print job settings but custom paper was specified using the printer driver or by print command, printing can be performed from the bypass tray with the job's settings applied.
To use this function, the following conditions must be met:
Set [APS] in [Paper Type:Bypass Tray] under [Tray Paper Settings] to [On].
[Auto Tray Select] is selected for the input tray setting in the printer driver.
Trays 1 to 2
You can specify whether the paper size and type settings applied for Trays 1 to 2 are those specified using the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
Driver/Command
Machine Setting(s)
For details about how to change the Printer Features, see "Accessing User Tools", Connecting the Machine/System Settings.
