Configuration:
Desktop
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CIS
Copy process:
LED alley and electro-photographic printing
Development:
Non-magnetic one-component development system
Fusing:
Thin, hard heating roller fusing system
Resolution:
Scanning originals:
Exposure glass: 300 × 600 dpi
ADF: 300 × 300 dpi
Printing: 1200 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Originals:
Sheet, book, three-dimensional object, ID card
Maximum original size:
Exposure glass: 222 × 301 mm (8.8 × 11.9 inches)
ADF: 216 × 900 mm (8.5 × 35.5 inches)
Paper size:
Tray 1:
A4, A5
, A6
, B5 JIS
, B6 JIS
,
81/2 × 14, 81/2 × 13
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 101/2
, 8 × 10
, 71/4 × 101/2
, 51/2 × 81/2
, 41/8 × 91/2
, 37/8 × 71/2
,
C5 Env, C6 Env
, DL Env
16K
Tray 1 (custom size):
Vertical: 148.0–356.0 mm (5.83–14.01 inches)
Horizontal: 100.0–216.0 mm (3.94–8.50 inches)
Bypass tray:
A4, A5
, A6
, B5 JIS
, B6 JIS
,
81/2 × 14, 81/2 × 13
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 101/2
, 8 × 10
, 71/4 × 101/2
, 51/2 × 81/2
, 41/8 × 91/2
, 37/8 × 71/2
,
C5 Env, C6 Env
, DL Env
, 16K
Bypass tray (custom size):
Vertical: 127.0–900.0 mm (5.00–35.43 inches)
Horizontal: 60.0–216.0 mm (2.37–8.50 inches)
Duplex:
A4, A5
, A6
, B5 JIS
, B6 JIS
,
81/2 × 14, 81/2 × 13
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
Duplex (custom size):
Vertical: 279–356 mm (10.99–14.01 inches)
Horizontal: 100–216 mm (3.94–8.50 inches)
Paper weight:
Tray 1: 52–162 g/m2 (14 lb. Bond–90 lb. Index)
Bypass tray: 52–162 g/m2 (14 lb. Bond–90 lb. Index)
Duplex: 52–162 g/m2 (14 lb. Bond–90 lb. Index)
For details about and recommendations concerning thick paper, see "Thick Paper", Paper Specifications and Adding Paper.
Missing image area (Copier):
Leading edge: 3.0 ± 1.5 mm (0.12 ± 0.06 inches)
Trailing edge: 3.0 mm (0.12 inches)
Left edge: 2.0 ± 1.5 mm (0.08 ± 0.06 inches)
Right edge: 2.0 mm (0.08 inches)
The missing image area of envelopes is 15 mm (0.6 inches) for the leading edge and 10 mm (0.4 inches) for the other edges.
First print time:
6.4 seconds
(A4, 81/2 × 11
, feeding from tray 1)
First copy time:
13.0 seconds
(A4, 81/2 × 11
, delivered face down, feeding from tray 1, on the exposure glass)
Copy/print speed:
(mainly Europe and Asia):
One-side copying: 30 sheets/minute (A4)
Two-side copying: 15 sheets/minute (A4)
(mainly North America):
One-side copying: 31 sheets/minute (81/2 × 11)
Two-side copying: 16 sheets/minute (81/2 × 11)
Reproduction ratio:
Preset reproduction ratios (%)(mainly Europe and Asia):
Enlargement: 200, 141
Full size: 100
Reduction: 93, 71, 50
Preset reproduction ratios (%)(mainly North America):
Enlargement: 155, 129
Full size: 100
Reduction: 93, 78, 65
Zoom: From 25–400% in increments of 1%
Maximum continuous copy run:
99 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
Tray 1: 250 sheets
Bypass tray: 100 sheets
Power requirements:
(mainly Europe and Asia)
220–240 V, 5.3 A, 50/60 Hz
(mainly North America)
120–127 V, 10 A, 60 Hz
Power consumption:
Main unit only(mainly Europe and Asia)
SP 3600SF
Ready: 85 W
During printing: 481 W
SP 3610SF
Ready: 84 W
During printing: 472 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Main unit only(mainly North America)
SP 3600SF
Ready: 89 W
During printing: 481 W
SP 3610SF
Ready: 83 W
During printing: 472 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system(mainly Europe and Asia)
Maximum: 1,010 W
The complete system consists of the main unit and lower paper trays.
Complete system(mainly North America)
Maximum: 1,050 W
The complete system consists of the main unit and lower paper trays.
Warm-up time:
19 seconds (23°C (73.4°F), rated voltage)
Dimensions:
W × D × H:
400 × 392 × 406 mm (15.8 × 15.5 × 16.0 inches)
Space for main unit (W × D) (including the bypass tray):
400 × 594 mm (15.8 × 23.4 inches)
Weight:
Approx. 19 kg (41.9 lb.)
First Print Time, First Copy Time, Power Consumption, and Warm-UP Time may differ depending on the conditions and environment of the machine.