Previous
Enter the fax number again to confirm the destination is correct.
Transmission is disabled if the confirmation fax number does not match the first fax number. This function helps prevent users accidentally sending faxes to the wrong destination.
If you want to enable this function, contact your service representative.
When using this function, you must press [Manual] on the standby display to enter the fax number.
Press [Manual]
Enter the fax number 
Press [OK]
Enter the fax number again Press [OK]
If the "Entered destination is not correct. Please re-enter." message appears, press [Exit] and check the fax number again, and then repeat the procedure.
When the fax number reentry function is enabled, you cannot use On Hook Dial and Manual Dial.
If you want to use On Hook Dial and Manual Dial on your machine while the fax number reentry function is enabled, contact your service representative. However, note that the fax number reentry function does not work when you use On Hook Dial or Manual Dial.
