This section explains precautions to add toner when it has run out, and how to dispose of used toner.
|
|
|
|
|
|
|
|
|
|
Always replace the print cartridge when a notification appears on the display.
Errors may occur if you use toner other than the recommended one.
When adding toner, do not turn off the main power. Otherwise, settings will be lost.
Store toner where it will not be exposed to direct sunlight, temperatures rise above 35 °C (95 °F), or high humidity.
Store toner on a flat surface.
Do not shake the print cartridge with its mouth down after removing it. Residual toner may scatter.
Do not repeatedly install and remove print cartridges. This will result in toner leakage.
For details about installing the toner, see the instructions on the package of the toner.
"Add toner. Replace Toner Cartridge."
When the following messages appear on the display, the toner has almost run out. Have a replacement print cartridge at hand.
"Toner is almost empty."
If appears when there is a lot of toner, follow the toner replacement instructions that appear on the screen: Pull out the cartridge, and then reinstall it.
You can make about 700 output even after appears, but replace the toner early to prevent poor output quality.
Comply with our Print Cartridge Recycling Program, whereby used print cartridges are collected for processing. For details, ask your sales or service representative.