Previous
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or copied paper) might not print correctly, depending on how the paper is placed.
Settings using the control panel
Set [Letterhead Setting] to [Auto Detect], and then place the paper as shown in the table below. For details about [Letterhead Setting], see System.
Paper orientation
The meanings of the icons are as follows:
Icon |
Meaning |
|---|---|
|
Place or load paper printed side face up. |
|
Place or load paper printed side face down. |
Print side |
Trays 1, 2 |
Bypass tray |
|---|---|---|
One-sided |
|
|
Two-sided |
|
|
To print on letterhead paper when [Letterhead Setting] is set to [Auto Detect], you must specify [Letterhead] for the paper type in the printer driver's settings.
For details about how to make two-sided prints, see Printing on Both Sides of a Page.
