Previous
This section describes the configuration procedure for network printers in the NetWare environment. In the NetWare environment, you can connect the printer as a "print server" or "remote printer".
To use this function, an optional NetWare card is required.
To use this function, it is necessary to enable [NetWare] first. For details, see:
Host Interface (for SP 4510DN)
Interface Settings (for SP 4520DN)
You can also enable NetWare using Web Image Monitor. For details, see Web Image Monitor Help.
IPv6 cannot be used with this function.
This function supports NetWare 6.5.
This procedure assumes an environment is already prepared for normal NetWare running the printing service setting.
The procedure is explained using the following names as examples:
File server's name: CAREE
Print server's name: PSERV
Printer's name: R-PRN
Queue name: R-QUEUE
