Previous
Program/Change/Delete User Text
You can register text phrases you often use when specifying settings, such as ".com" and "Regards". You can register up to 40 entries.
Panel Key Sound
You can specify whether or not the beeper (key tone) sounds when a key is pressed.
Default: [Medium]
Function Priority
You can specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on.
Default: [Home]
Screen Color Setting
You can change the screen color.
Default: [Blue-gray]
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or control panel is pressed continuously.
Default: [Normal]
Measurement Unit
You can switch the measurement between [mm] and [inch] when you specify a custom size on the control panel.
Default:
(mainly Europe and Asia)
[mm]
(mainly North America)
[inch]
Check Status/Job List Display Time
You can specify how long to display the System Status and Job List display for.
When the setting is [On], you can specify a display time between 10 and 999 seconds in 1 second increments using the number keys.
Default: [On], "15" second(s)
External Keyboard
You can specify the layout of the external keyboard connected to the USB port.
Default: [Off]
Program/Change USB Device List
You can register the "Product ID" and "Vendor ID" information of a USB keyboard or IC card reader device to the device list. You can register up to two pairs of "Product ID" and "Vendor ID" information.
Compatible ID
You can enable or disable the Compatible ID setting.
Default: [Active]
