Adding a Virtual Printer

Log in to Web Image Monitor in administrator mode.

For details, see Displaying the top page.

Click [Configuration] on the [Device Management] menu.

Under "Printer", click [Virtual Printer Settings].

Click [Add].

In "Virtual Printer Name", enter a name for the new printer, and then select the protocol in the "Protocol" list.

The following Virtual Printer protocols are available: [TCP/IP (Unspecified, Normal)], [TCP/IP (Unspecified, Priority)], [TCP/IP (RHPP)], [TCP/IP (DIPRINT)], and [NetWare].

If you select [TCP/IP (DIPRINT)] or [NetWare] in the "Protocol" list, you cannot specify a virtual printer name.

Click [OK].

Click [Logout].

Quit Web Image Monitor.