Previous
Inserting an SD card
Align the SD card in the correct direction, and then push it straight into the media slot until it clicks.
When the SD card is inserted correctly, the media access lamp beside the media slot lights.
The media access lamp flashes when the SD card is being accessed.
Inserting a USB flash memory device
Certain USB flash memory device cannot be used.
Do not use a USB extension cable to connect a USB flash memory device to the printer. Insert the USB flash memory device directly into the media slot.
Align the USB flash memory device in the correct direction, and then push it straight into the media slot.
When the USB flash memory device is inserted correctly, the media access lamp beside the media slot lights.
The media access lamp lights up and remains lit as long as a USB flash memory device is inserted.
Removing an SD card
Make sure the media access lamp is not lit.
Push and release the SD card.
Pinch the SD card, and then pull it carefully out of the slot.
Removing a USB flash memory device
Pull the USB flash memory device carefully out of the slot.
