Skip header
 

Configuring Envelope Settings Using the Control Panel

When printing on envelopes, load envelopes in bypass tray or Tray 1, and then follow the procedure below to specify envelope type and thickness.

SP 4510DN

Press the [Menu] key, and then select the setting items using the [Down arrow key ] or [Up arrow key ] key.

1Select [Paper Input] Press [OK]

2Select [Paper Size: (tray name)] Press [OK]

3Select the envelope type Press [OK]

4Select [Paper Type: (tray name)] Press [OK]

5Select [Envelope] Press [OK]

6Press [Escape]

7Select [Maintenance] Press [OK]

8Select [General Settings] Press [OK]

9Select [Envelope Setting] Press [OK]

10Select the source tray for which you want to change the paper thickness Press [OK]

11Select the paper thickness Press [OK]

SP 4520DN

1Press the [User Tools] key, and then display the [Tray Paper Settings] screen.

[System Settings] [Tray Paper Settings]

2Press [Tray Paper Size: (tray name)], and then specify the paper size.

Select the envelope size [OK]

3Press [Paper Type: (tray name)], and then specify the paper type and thickness.

  • [Paper Type]

    [Envelope] [OK]

  • [Paper Thickness]

    [Plain Paper 2] or [Thick Paper 2] [OK]

Note

  • For details about how to load envelopes, see Loading Envelopes.

  • Configure the paper settings appropriately using both the printer driver and the control panel. For details about paper settings using the printer driver, see Printing on Envelopes.