Skip header
 

Specifying envelope size for the bypass tray

Important

  • If you select [Machine Setting(s)] in [Bypass Tray] under [Tray Setting Priority] in [System] of the Printer Features menu, the settings made using the control panel have priority over the printer driver settings. For details, see "System", Print.

  • The default of [Bypass Tray] is [Driver/Command].

1Press the [User Tools/Counter] key.

User Tools/Counter key illustration

2Press [Tray Paper Settings].

3Press [Down arrow key].

4Press [Printer Bypass Paper Size].

5Select the paper size.

Operation panel screen illustration

6Press [OK].

7Press the [User Tools/Counter] key.

Note

  • Confirm that the top of the stack is not higher than the limit mark on the side guides.

  • Do not push the stack of envelopes with too much force.

  • Confirm that the edges of envelopes fit under the side guides.

  • After specifying the paper size, select "Envelope" as the paper types using both the User Tools and printer driver, and specify the thickness of envelopes. For details, see "Printing on Envelopes", Print.

PreviousNext