|
Exterior: Front view
ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
ADF cover
Open this cover to remove originals jammed in the ADF.
ADF cover open lever
Pull this lever to open the ADF cover.
Input tray for the ADF
Place stacks of originals here.
Extender for the ADF tray
Extend this when placing paper longer than A4 in the input tray for ADF.
Exposure glass
Place originals face down here.
Cover for the exposure glass
Open this cover to place originals on the exposure glass.
Output tray for the ADF
Originals scanned with the ADF are output here.
Stop fence for the ADF
Pull out this fence to prevent originals from falling off.
Control panel
See Guide to the Names and Functions of the Machine's Control Panel.
Ventilation holes
Prevent overheating.
Standard tray
Copied/printed paper and fax messages are delivered here.
Front cover open button
Push this button to open the front cover.
Memory cover
The memory unit and HDD are installed inside. Don't open the memory cover.
Front cover
Open to access the inside of the machine and remove jammed paper.
Open here to replace the toner cartridge.
Lower paper trays (option)
Load paper here.
For details, see Guide to Functions of the Machine's Options.
Tray 1
Load paper here.
Main power switch
To operate the machine, the main power switch must be on. If it is off, turn the switch on.
Bypass tray open lever
Push this lever to open the bypass tray.
Stop fences
Pull this fence to prevent paper from falling off.
Bypass tray
Use to copy or print on thick paper, OHP transparencies, envelopes, and label paper (adhesive labels).
Extender for the bypass tray
Pull this extender out when loading A4, 81/2 × 11 or larger size paper in the bypass tray.
Paper guides
When loading paper in the bypass tray, align the paper guides flush against the paper.
Exterior: Rear view
Handset slit (mainly North America)
Attach the handset bracket to the slit.
Ventilation holes
Prevent overheating.
Power connector
Connect the power cord to the machine. Insert the other end into an electrical outlet.
Rear cover open lever
Pull this lever to open the rear cover.
Rear cover
Open to access the inside of the machine and remove jammed paper.
Gigabit Ethernet port
Use a network interface cable to connect the machine to a network.
USB 2.0 [Type B] port
Use a USB cable to connect the machine to a computer.
Security slot
Connect a security cable to prevent theft.
USB port H (Port for use by customer engineer)
Do not use this port.
Slot
Optional interface boards can be inserted.
Insert an optional wireless LAN interface board, file format converter or IEEE 1284 interface board.
Expansion card slots
Optional SD cards can be installed. Do not open the cover.
External telephone connector
For connecting an external telephone.
G3 interface unit connector
For connecting a telephone line.
USB Host Interface
Connect external devices such as a card authentication device.
The duplex function partially ejects paper out of the machine so that the paper can be flipped over. Do not try to remove the paper while it is being flipped over by the duplex function.
Interior: Front view
Toner cartridge
Pull out the toner cartridge and remove jammed paper.
Messages appear on the screen when the toner cartridge needs to be replaced, or a new cartridge needs to be prepared.
For details about the messages that appear on the screen when consumables need to be replaced, see "Replenishing and Replacing Consumables", Maintenance and Specifications.
When you remove jammed paper, pull out the toner cartridge with the drum unit. If you want to remove only the toner cartridge, pull down the lever on the right side of the toner cartridge, and then pull the toner cartridge out.
Drum unit
Messages appear on the screen when the drum unit needs to be replaced, or a new drum unit needs to be prepared.
For details about the messages that appear on the screen when consumables need to be replaced, see "Replenishing and Replacing Consumables", Maintenance and Specifications.
Interior: Rear view
Fusing unit
Pull out the fusing unit and remove jammed paper.
Messages appear on the screen when the fusing unit needs to be replaced, or a new fusing unit needs to be prepared.
For details about the messages that appear on the screen when consumables need to be replaced, see "Replenishing and Replacing Consumables", Maintenance and Specifications.
The fusing unit is included in Maintenance Kit.