Previous
This section explains the procedure for sending multiple originals as a multi-page file or storing them as a single stored file.
To send multiple originals as a multi-page file, in [File Type], select [Multi-page]. For details about file types, see File Type
.
Press [Send Settings].
Press [
] three times, and then press [Batch].
For detail about [Batch], see Batch.
Press [OK].
Place originals.
Make settings for sending or storing.
Press the [Start] key to scan originals.
Place additional originals, and then press the [Start] key.
Repeat this step until all originals are scanned.
After all originals are scanned, press the [
] key.
Storing or transmission starts.
When scanning originals using the exposure glass, depending on the settings for [Wait Time for Next Orig.: Exposure Glass] in [Scan Settings] under [Scanner Features], the machine can wait for additional originals even if [Batch] is not selected in [Send Settings]. For details about [Wait Time for Next Orig.: Exposure Glass], see Scan Settings
.If, under [Scanner Features], [Set Wait Time] is set for [Wait Time for Next Orig.: Exposure Glass], place additional originals within the specified time. When the countdown ends, transmission or storage starts automatically. To start transmission or storage before the countdown is completed, press the
key. Countdown is canceled if Scan Settings or other settings are changed in the meantime. Place additional originals, and then press the [Start] key. The machine scans the originals and the countdown is resumed. For details about [Wait Time for Next Orig.: Exposure Glass], see Scan Settings.
