Skip header
 

Print Area

The following shows the recommended print area for this machine.

Illustration of print area for paper numbered callout illustration

  1. Print area

  2. Feed direction

  3. 4.3 mm (0.17 inches)

  4. 4.3 mm (0.17 inches)

  5. 4.3 mm (0.17 inches)

  6. 4.3 mm (0.17 inches)

Note

  • The print area may vary depending on the paper size, printer language and printer driver settings.

  • Depending on the printer driver settings, you may be able to print outside the recommended print area. However, the actual output may not come out as desired, or a paper feed problem may occur.

  • If [Edge to Edge Print] under [System] in [Printer Features] is enabled, the margins on the left, right, and bottom edges in relation to the feed direction will become 0 mm. For details about [Edge to Edge Print], see System.

  • When performing duplex printing, printing in the area that is 2.2-6.2 mm (0.09-0.25 inches) wide on the bottom edge of the back side of paper is not recommended.

  • When printing on envelopes, printing in the area that is 10 mm (0.40 inches) wide on all four edges is not recommended.

  • When printing on thick paper is performed and the paper is thicker than 106 g/m2 (28 lb.), printing in the area that is 5 mm (0.20 inches) wide on all four edges is not recommended.

PreviousNext