Skip header
 

Using Web Image Monitor

1Start a Web browser.

2Enter "http://(machine's IP address or host name) /" in the address bar to access the printer whose settings you want to change.

Top Page of Web Image Monitor appears.

3Click [Login].

The dialog box for entering the user name and password appears.

4Enter the user name and password, and then click [Login].

Contact your administrator for information about the settings.

Depending on the configuration of your Web browser, the login user name and password might be saved. If you do not want to save them, configure your Web browser's settings so that this information is not saved.

5In the menu area, click [Configuration] on the [Device Management] menu.

6Under "Network", click [IPv4].

7Check that [Active] is selected for [WINS] in the [Ethernet + Wireless LAN] column, and then enter the WINS server IPv4 address in [Primary WINS Server] and [Secondary WINS Server].

8Click [OK].

9“Updating...” appears. Wait for about one or two minutes, and then click [OK].

10Click [Logout].

11Quit Web Image Monitor.

Note