Skip header
 

Locating the NCP folder manually

1Press the [User Tools/Counter] key.

2Press [Address Book Mangmnt].

3Press [Change].

4Press [Folder].

5Select the name whose folder you want to change.

Press the name key, or enter the registered number using the number keys.

You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.

6Press [Folder].

7Press [Enter] under "Path".

8Press [Enter] under "Path".

9Enter the path where the folder is located.

10Press [OK].

11Press [Connection Test] to check the path is set correctly.

12Press [Exit].

13Press [OK] three times.

Note

  • NCP is available only when an optional NetWare unit is installed.

  • If you set "Connection Type" to [NDS], and if the NDS tree name is "tree", the name of the context including the volume is "context", the volume name is "volume" and the folder name is "folder", then the path will be "\\tree\volume\context\folder".

  • If you set "Connection Type" to [Bindery], and if the NetWare server name is "server", the volume name is "volume" and the folder name is "folder", then the path will be "\\server\volume\folder".

  • You can enter a path using up to 256 characters.

  • If the connection test fails, check the settings, and then try again.

PreviousNext