Skip header
 

etherconfig

Use the "etherconfig" command to view and configure the Ethernet parameters.

View settings

msh> etherconfig

Specify Ethernet Speed

msh> etherconfig speed {auto_100|auto_1000|10f|10h|100f|100h}

  • auto_100=Auto 100 Select

  • auto_1000=Auto 1000 Select

  • 10f=10 Mbps Full Duplex

  • 10h=10 Mbps Half Duplex

  • 100f=100 Mbps Full Duplex

  • 100h=100 Mbps Half Duplex

The default is "auto_100".