Configuration:
Desktop
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CCD
Copy process:
LED alley and electro-photographic printing
Development:
Non-magnetic one-component development system
Fusing:
Thin, hard heating roller fusing system
Resolution:
Scanning originals:
Exposure glass: 600 × 600 dpi
ADF: 600 × 300 dpi
Printing: 1200 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Originals:
Sheet, book, three-dimensional object, ID card
Maximum original size:
Exposure glass: 216 × 297 mm (8.5 × 11.7 inches)
ADF:
One-sided originals: 216 × 600 mm (8.5 × 23.6 inches)
Two-sided originals: 216 × 356 mm (8.5 × 14.0 inches)
Paper size:
Tray 1:
A4, A5, A6, B5 JIS, B6 JIS,
81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 41/8 × 91/2, 37/8 × 71/2,
C5 Env, C6 Env, DL Env16K
Tray 1 (custom size):
Vertical: 148.0–356.0 mm (5.83–14.01 inches)
Horizontal: 100.0–216.0 mm (3.94–8.50 inches)
Bypass tray:
A4, A5, A6, B5 JIS, B6 JIS,
81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 41/8 × 91/2, 37/8 × 71/2,
C5 Env, C6 Env, DL Env, 16K
Bypass tray (custom size):
Vertical: 127.0–900.0 mm (5.00–35.43 inches)
Horizontal: 60.0–216.0 mm (2.37–8.50 inches)
Duplex:
A4, A5, A6, B5 JIS, B6 JIS,
81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 16K
Duplex (custom size):
Vertical: 148–356 mm (5.83–14.01 inches)
Horizontal: 100–216 mm (3.94–8.50 inches)
Paper weight:
Tray 1: 52–162 g/m2 (14 lb. Bond–90 lb. Index)
Bypass tray: 52–162 g/m2 (14 lb. Bond–90 lb. Index)
Duplex: 52–162 g/m2 (14 lb. Bond–90 lb. Index)
For details about and recommendations concerning thick paper, see "Thick Paper", Paper Specifications and Adding Paper.
Missing image area (Copier):
Leading edge: 3.0 ± 1.5 mm (0.12 ± 0.06 inches)
Trailing edge: 3.0 mm (0.12 inches)
Left edge: 2.0 ± 1.5 mm (0.08 ± 0.06 inches)
Right edge: 2.0 mm (0.08 inches)
The missing image area of envelopes is 15 mm (0.6 inches) for the leading edge and 10 mm (0.4 inches) for the other edges.
First print time:
4.2 seconds
(A4, 81/2 × 11, feeding from tray 1)
First copy time:
5.2 seconds
(A4, 81/2 × 11, delivered face down, feeding from tray 1, on the exposure glass)
Copy/print speed:
(mainly Europe and Asia):
One-side copying: 40 sheets/minute (A4)
Two-side copying: 33 sheets/minute (A4)
(mainly North America):
One-side copying: 42 sheets/minute (81/2 × 11)
Two-side copying: 33 sheets/minute (81/2 × 11)
Reproduction ratio:
Preset reproduction ratios (%)(mainly Europe and Asia):
Enlargement: 200, 141
Full size: 100
Reduction: 93, 71, 50
Preset reproduction ratios (%)(mainly North America):
Enlargement: 155, 129
Full size: 100
Reduction: 93, 78, 65
Zoom: From 25–400% in increments of 1%
Maximum continuous copy run:
99 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
Tray 1: 500 sheets
Bypass tray: 100 sheets
Power requirements:
(mainly Europe and Asia)
220–240 V, 5.3 A, 50/60 Hz
(mainly North America)
120–127 V, 10 A, 60 Hz
Power consumption:
Main unit only(mainly Europe and Asia)
Ready: 97 W
During printing: 616 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Main unit only(mainly North America)
Ready: 99 W
During printing: 616 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system(mainly Europe and Asia)
Maximum: 1140 W
The complete system consists of the main unit, ADF, lower paper trays, Copy Data Security unit, HDD, fax unit, memory unit, and IEEE 1284 interface board.
Complete system(mainly North America)
Maximum: 1180 W
The complete system consists of the main unit, ADF, lower paper trays, handset, Copy Data Security unit, HDD, fax unit, memory unit, and IEEE 1284 interface board.
Warm-up time:
17 seconds (23°C (73.4°F), rated voltage)
Dimensions:
W × D × H up to ADF:
419 × 427 × 484 mm (16.5 × 16.8 × 19.1 inches)
Space for main unit (W × D) (including the bypass tray):
424 ×629 mm (16.7 × 24.8 inches)
Weight:
23 kg (50.7 lb.)
First Print Time, First Copy Time, Power Consumption, and Warm-UP Time may differ depending on the conditions and environment of the machine.