Skip header
 

Connecting to the Interface

This section explains how to identify the machine's interface and connect the machine according to the network environment.

connecting to the interfaces illustration (numbered callout illustration)

  1. Slot

    The slot can accommodate the following interface board:

    • Wireless LAN interface unit: Required if you want to connect this machine to a wireless LAN. When installed in this slot, this unit allows you to connect the machine to an IEEE 802.11 a/b/g/n wireless LAN.

  2. USB 2.0 [Type B] port

    Port for connecting a USB2.0 [Type B] interface cable

    This interface allows the machine to print over USB connection.

  3. Ethernet port

    Port for using a 100BASE-TX or 10BASE-T cable

    Use this interface to connect the machine to a network.

    If you want to use an Ethernet interface cable that supports 1000BASE-T, contact your sales or service representative.

Note

  • The Ethernet port and Wireless LAN interface unit cannot be used simultaneously. Communication with the machine will fail if cables are connected to both ports simultaneously. If the optional Wireless LAN interface unit is installed, you need to set [LAN Type] to [Wireless LAN] in [Interface Settings] in [System Settings].

Related topics

Connecting to the Ethernet Interface RegionA icon (mainly Europe and Asia)
Connecting to the USB (Type B) Interface
Connecting to the Wireless LAN Interface
PreviousNext