Previous
The machine assembles copies as sets in sequential order.
You cannot use the bypass tray with Rotate Sort.
Sort
Copies are assembled as sets in sequential order.
Rotate Sort
Every other copy set is rotated by 90 degrees (
) and delivered to the copy tray.
To use the Rotate Sort function, two paper trays loaded with paper of the same size and type, but in different orientation (), are required. For details, see "Tray Paper Settings", Connecting the Machine/ System Settings.
Press [Finishing].
Select [Sort] or [Rotate Sort], and then press [OK].
Enter the number of copy sets using the number keys.
Place the originals.
To confirm the type of finishing, press the [Sample Copy] key.
Press the [Start] key.
If you are copying from the exposure glass, a single copy of each original is made first. If the first copy set is acceptable, you can make the remaining copy sets by pressing the [
] key. The time required for copy sets to be delivered varies depending on the print settings.Paper sizes and orientations that can be used in the Rotate Sort function are as follows:
A4
, A5, B5 JIS, 81/2 × 11, 71/4 × 101/2, 41/8 × 91/2, C5 Env, 16K
When using the Rotate Sort function, the capacity may be reduced.
When the number of copies exceeds capacity, copying stops. If this happens, remove copies from the tray to resume copying.
The number of sheets that can be placed in Internal Tray 1 is 500.
You can change the settings for the Sort function under [Input / Output] in User Tools. For details, see Input / Output.
