Skip header
 

Rear and Bottom view

The machine's rear and bottom view illustration numbered callout illustration

  1. Ethernet port

    Port to which the 1000BASE-T, 100BASE-TX, or 10BASE-T cable connects. This port is used when connecting the machine to a wired network.

  2. DVI-D connector

    Connector used to connect this machine to a video output device, such as a projector or monitor, via a DVI-D connector.

    DVI-I connection is not supported.

  3. Analog RGB connector

    Connector used to connect this machine to a video output device, such as a projector or monitor, via a RGB (VGA) connector.

  4. Anti-theft lock hole

    Hole for connecting the anti-theft chain.

  5. Air inlet

    Brings in air from the outside to cool the machine and prevent it from overheating.

  6. Power connector

    Connector for connecting the power cord.

PreviousNext