Skip header
 

Adjusting the Volume

You can change the volume of the following sounds that the machine makes.

On Hook Mode

Heard when [On Hook] is pressed.

At Transmission

Heard when "Immediate Transmission" is performed.

At Reception

Heard when the machine receives a document.

At Dialing

Heard after the [Start] key is pressed until the line connects to the destination.

At Printing

Heard when a received document is printed.

1Display the initial settings screen.

  • When you use the standard operation panel:

    Press the [User Tools/Counter] key.

    User Tools/Counter key illustration

  • When you use the Smart Operation Panel:

    Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then press the [User Tools] icon (Operation panel screen illustration) on the Home screen 4.

2Press [Facsimile Features].

3Check that [General Settings] screen appears.

4Press [Adjust Sound Volume].

Operation panel screen illustration

5Press [Lower] or [Louder] to adjust the volume, and then press [OK].

You can hear the actual volume by pressing [Check].

You can set the volume level to between 0 and 7.

6Close the initial settings screen.

  • When you use the standard operation panel:

    Press the [User Tools/Counter] key.

  • When you use the Smart Operation Panel:

    Press [User Tools/Counter] (Operation panel screen illustration) on the top right of the screen.

Note

  • You can adjust the On Hook volume when you press [On Hook]. For details about how to adjust the On Hook volume, see "On Hook Dial", Fax.